F5F Stay Refreshed Hardware Desktop Temperature stabilized between 40 and 60-65°C during idle at 360mm AIO.

Temperature stabilized between 40 and 60-65°C during idle at 360mm AIO.

Temperature stabilized between 40 and 60-65°C during idle at 360mm AIO.

Pages (2): Previous 1 2
_
_ALShehri
Member
212
04-11-2020, 01:21 AM
#11
Maximum pump speed reached (operating pump at full capacity is normal) Review the fan curves.
_
_ALShehri
04-11-2020, 01:21 AM #11

Maximum pump speed reached (operating pump at full capacity is normal) Review the fan curves.

I
IamRikyPT
Member
129
04-11-2020, 02:55 PM
#12
The fan speed is near 1300 RPM, previously about 800 at idle. I adjusted the fan curve directly through the BIOS, avoiding any third-party apps.
I
IamRikyPT
04-11-2020, 02:55 PM #12

The fan speed is near 1300 RPM, previously about 800 at idle. I adjusted the fan curve directly through the BIOS, avoiding any third-party apps.

G
godfreydtm
Member
214
04-13-2020, 12:28 PM
#13
Air pockets in an AIO loop can influence your thermals by altering airflow and pressure dynamics.
G
godfreydtm
04-13-2020, 12:28 PM #13

Air pockets in an AIO loop can influence your thermals by altering airflow and pressure dynamics.

C
Coolio4691YT
Junior Member
49
04-13-2020, 08:49 PM
#14
If air pockets are present in the pump, it might influence thermals. Your radiator is positioned at the top, which means most air should be rising there (this is ideal). Running the pump at full capacity makes it improbable this is the issue.
C
Coolio4691YT
04-13-2020, 08:49 PM #14

If air pockets are present in the pump, it might influence thermals. Your radiator is positioned at the top, which means most air should be rising there (this is ideal). Running the pump at full capacity makes it improbable this is the issue.

Y
Yaubarry
Member
204
04-13-2020, 10:08 PM
#15
I seriously doubt this is a hardware issue, did you notice any change in the CPU power draw? BIOS update could change the voltage for the CPU causing higher power draw. The AIO is still able to cool the CPU underload, 90C is completely fine, just higher that before. So if fan curves/pump speed is same as before, then CPU setting is next. A few months ago Asus boards BIOS had issue with voltage causing CPUs to be damaged, a BIOS update fixed it. So it's possible.
Y
Yaubarry
04-13-2020, 10:08 PM #15

I seriously doubt this is a hardware issue, did you notice any change in the CPU power draw? BIOS update could change the voltage for the CPU causing higher power draw. The AIO is still able to cool the CPU underload, 90C is completely fine, just higher that before. So if fan curves/pump speed is same as before, then CPU setting is next. A few months ago Asus boards BIOS had issue with voltage causing CPUs to be damaged, a BIOS update fixed it. So it's possible.

B
222
04-17-2020, 01:52 PM
#16
Thank you! I'm glad you found the response helpful.
B
bakedpotatoboy
04-17-2020, 01:52 PM #16

Thank you! I'm glad you found the response helpful.

O
Oversightx
Member
166
04-20-2020, 02:47 AM
#17
I’ll revert to the older BIOS and see how it goes. It seems there were no noticeable changes in CPU power consumption, which is good—I’m not familiar with CPU voltage specs anyway.
O
Oversightx
04-20-2020, 02:47 AM #17

I’ll revert to the older BIOS and see how it goes. It seems there were no noticeable changes in CPU power consumption, which is good—I’m not familiar with CPU voltage specs anyway.

I
ImFryZ
Junior Member
14
04-20-2020, 11:27 AM
#18
It's okay if you're willing to try. What I mean is that a 90°C temperature is acceptable, but if your AIO stops working, your PC should have overheated and shut down.
I
ImFryZ
04-20-2020, 11:27 AM #18

It's okay if you're willing to try. What I mean is that a 90°C temperature is acceptable, but if your AIO stops working, your PC should have overheated and shut down.

J
Jithle
Junior Member
40
04-20-2020, 03:49 PM
#19
Sure! Let me know how I can help.
J
Jithle
04-20-2020, 03:49 PM #19

Sure! Let me know how I can help.

X
XDDanyXD
Junior Member
40
04-21-2020, 07:00 AM
#20
Use the curve optimizer in your BIOS for this task. There are many videos available if you're not sure about the steps. I suggest watching the Optimum Tech video on PBO with a Ryzen 5000. This should help!
X
XDDanyXD
04-21-2020, 07:00 AM #20

Use the curve optimizer in your BIOS for this task. There are many videos available if you're not sure about the steps. I suggest watching the Optimum Tech video on PBO with a Ryzen 5000. This should help!

Pages (2): Previous 1 2