Temperature is high in the I7 6700k.

Pages (3): Previous 1 2 3 Next

MONSTERmoose91
Senior Member

526

10-01-2016, 10:02 PM

#11

I secured it as tightly as possible, attaching the noctua mounting system to the board and connecting it to the cooler bracket.

MONSTERmoose91

10-01-2016, 10:02 PM #11

I secured it as tightly as possible, attaching the noctua mounting system to the board and connecting it to the cooler bracket.

_Ace_Plays
Member

10-03-2016, 11:03 AM

#12

How much paste you applied is tricky—it’s tough to overdo it, yet simple to use just a bit.

_Ace_Plays

10-03-2016, 11:03 AM #12

How much paste you applied is tricky—it’s tough to overdo it, yet simple to use just a bit.

kip1113
Member

129

10-03-2016, 04:35 PM

#13

Likely too much emphasis on X with a larger dot at its center.

kip1113

10-03-2016, 04:35 PM #13

Likely too much emphasis on X with a larger dot at its center.

ghostlydigger
Senior Member

500

10-03-2016, 10:39 PM

#14

If the pressure is correct, excess won’t cause an issue—it simply leaks past the edges (though this might still be an issue).

ghostlydigger

10-03-2016, 10:39 PM #14

If the pressure is correct, excess won’t cause an issue—it simply leaks past the edges (though this might still be an issue).

Fireryan1
Member

10-07-2016, 02:16 PM

#15

Initially, hwinfo64 displays system information. Then, adjust the cooler and reapply thermal paste. Check ambient temperature and case airflow.

Fireryan1

10-07-2016, 02:16 PM #15

Initially, hwinfo64 displays system information. Then, adjust the cooler and reapply thermal paste. Check ambient temperature and case airflow.

sebpet09
Junior Member

10-09-2016, 09:03 PM

#16

It's possible the TIM under the IHS is weak or dried out, which isn't uncommon. A delid can still provide some benefit regardless. However, it tends to be more invasive.

sebpet09

10-09-2016, 09:03 PM #16

It's possible the TIM under the IHS is weak or dried out, which isn't uncommon. A delid can still provide some benefit regardless. However, it tends to be more invasive.

Sharpie949
Junior Member

10-10-2016, 05:42 AM

#17

Case airflow features a 120mm fan on the front and another 120mm fan at the back. Current temperature is 24 degrees Celsius, room temperature.

Sharpie949

10-10-2016, 05:42 AM #17

Case airflow features a 120mm fan on the front and another 120mm fan at the back. Current temperature is 24 degrees Celsius, room temperature.

Slimy_Prophet
Member

10-12-2016, 11:09 AM

#18

Yes, we can retrieve additional metrics related to voltage and CPU temperature.

Slimy_Prophet

10-12-2016, 11:09 AM #18

Yes, we can retrieve additional metrics related to voltage and CPU temperature.

Casper_KS
Member

113

10-17-2016, 09:37 AM

#19

That's correct! It looks like something is off. Take a look at the side panel and verify the temperatures. Also, note that the screenshot doesn't display the temperature monitoring.

Casper_KS

10-17-2016, 09:37 AM #19

That's correct! It looks like something is off. Take a look at the side panel and verify the temperatures. Also, note that the screenshot doesn't display the temperature monitoring.

GC_Lewk
Member

219

10-17-2016, 01:40 PM

#20

You're seeing a higher CPU core count because you're manually setting the BIOS and adjusting the core voltage. This can increase performance beyond what the default settings provide.

GC_Lewk

10-17-2016, 01:40 PM #20

You're seeing a higher CPU core count because you're manually setting the BIOS and adjusting the core voltage. This can increase performance beyond what the default settings provide.

Pages (3): Previous 1 2 3 Next