F5F Stay Refreshed Hardware Desktop How about boosting my CPU and GPU performance?

How about boosting my CPU and GPU performance?

How about boosting my CPU and GPU performance?

Pages (3): Previous 1 2 3 Next
Q
Qufi
Member
171
11-22-2016, 11:27 PM
#11
Ok so i checked there is one on cpu fan 1 , and the other one is on pump fan 1, on the left side there is system fan but nothint is plugged there , i think its because the cable is short to reach it there
Q
Qufi
11-22-2016, 11:27 PM #11

Ok so i checked there is one on cpu fan 1 , and the other one is on pump fan 1, on the left side there is system fan but nothint is plugged there , i think its because the cable is short to reach it there

C
CraftingInd
Junior Member
15
11-23-2016, 07:35 PM
#12
This might be the case. Pumps usually operate at varying RPM/PWM ratios since they are driven differently compared to standard fan motors. If you have a CPU_OPT setting that functions, but you need control over pump fan 1 to act differently, it could be an option.
C
CraftingInd
11-23-2016, 07:35 PM #12

This might be the case. Pumps usually operate at varying RPM/PWM ratios since they are driven differently compared to standard fan motors. If you have a CPU_OPT setting that functions, but you need control over pump fan 1 to act differently, it could be an option.

H
Hypersnake
Member
208
11-24-2016, 03:22 AM
#13
I checked the BIOS and saw CPU fan 1 at 1370 rpm, while the pump fan was at 0 rpm.
H
Hypersnake
11-24-2016, 03:22 AM #13

I checked the BIOS and saw CPU fan 1 at 1370 rpm, while the pump fan was at 0 rpm.

O
orangeguy12345
Junior Member
46
12-01-2016, 03:01 AM
#14
Thanks all for your support. I actually increased my CPU to 4.6 and set the voltage to 1.3. After testing, I noticed my FPS became more stable, with a CPU temperature between 51 to 69°C. I’m considering overclocking the GPU next, but I’m not sure yet or if it would be beneficial.
O
orangeguy12345
12-01-2016, 03:01 AM #14

Thanks all for your support. I actually increased my CPU to 4.6 and set the voltage to 1.3. After testing, I noticed my FPS became more stable, with a CPU temperature between 51 to 69°C. I’m considering overclocking the GPU next, but I’m not sure yet or if it would be beneficial.

G
Gratoxx
Junior Member
34
12-03-2016, 12:18 AM
#15
Could you confirm if there was any noticeable enhancement in performance?
If not, it might not be a worthwhile investment.
G
Gratoxx
12-03-2016, 12:18 AM #15

Could you confirm if there was any noticeable enhancement in performance?
If not, it might not be a worthwhile investment.

L
Llabros
Senior Member
740
12-03-2016, 02:00 AM
#16
Actually, I think it would be better. I tried playing PUGB which sometimes runs below 65 to 75fps at certain places, but now I feel like it's improved. Or at least a consistent 84fps (my monitor locks the frame rate). All I really want is a stable 84fps whenever I go places, so maybe if I overclock my GPU a bit, I could achieve that stability? That’s what I was thinking, by the way, and thanks for your reply.
L
Llabros
12-03-2016, 02:00 AM #16

Actually, I think it would be better. I tried playing PUGB which sometimes runs below 65 to 75fps at certain places, but now I feel like it's improved. Or at least a consistent 84fps (my monitor locks the frame rate). All I really want is a stable 84fps whenever I go places, so maybe if I overclock my GPU a bit, I could achieve that stability? That’s what I was thinking, by the way, and thanks for your reply.

T
TomsorialKIng
Junior Member
6
12-10-2016, 09:06 AM
#17
So today I played normal games, mainly pubg, after a while I got BSOD. I overclocked my CPU to 4.6 and set the core voltage to 1.3. Was this the reason for the issue? And what should I do about it? My CPU temperature was between 60 and 71 degrees. Please give a quick response, thank you.
T
TomsorialKIng
12-10-2016, 09:06 AM #17

So today I played normal games, mainly pubg, after a while I got BSOD. I overclocked my CPU to 4.6 and set the core voltage to 1.3. Was this the reason for the issue? And what should I do about it? My CPU temperature was between 60 and 71 degrees. Please give a quick response, thank you.

J
Jarvan_IV
Member
120
12-12-2016, 02:03 AM
#18
Reduce OC.
J
Jarvan_IV
12-12-2016, 02:03 AM #18

Reduce OC.

C
Cra123
Senior Member
251
12-12-2016, 05:20 AM
#19
Adjust your OC to 4.2 and you received BSOD, core voltage is 1.33V.
C
Cra123
12-12-2016, 05:20 AM #19

Adjust your OC to 4.2 and you received BSOD, core voltage is 1.33V.

G
Galaxy__DustYT
Junior Member
21
12-12-2016, 06:07 AM
#20
Honestly, I reset everything to automatic mode. I was just worried about breaking something, right? Or would I? Right now, or should I do something else if I want to fix the BSOD? It didn’t crash even though I didn’t try anything after switching to auto.
G
Galaxy__DustYT
12-12-2016, 06:07 AM #20

Honestly, I reset everything to automatic mode. I was just worried about breaking something, right? Or would I? Right now, or should I do something else if I want to fix the BSOD? It didn’t crash even though I didn’t try anything after switching to auto.

Pages (3): Previous 1 2 3 Next