How about boosting my CPU and GPU performance?
How about boosting my CPU and GPU performance?
It seems unlikely anything was damaged. Just need to adjust it until it settles. The memory controller sits on the CPU, so you might have to tweak settings.
4.2 should bring it back to factory settings, meaning any overclocking is mainly about keeping it at 4.2GHz—either by turning off C-States or switching Windows to High Performance mode.
I haven’t experimented much with lower voltages at slower speeds, but it could cause issues because of heat buildup. It’s like the circuits are resisting extra voltage while trying to run faster.
I’ve tried this before in detail:
https://www.tweaktown.com/guides/74...e-...index.html
And mentioned it a few times: Skylake Overclocking Guide [With Statistics] on www.overclock.net
I once pushed a Kabylake chip to 5Ghz, but that was risky and not recommended.
Thank you for your message. In short, yes, you could try increasing the voltage each time if it keeps crashing, adjusting the core ratio accordingly—like 4.8 core ratio with voltages 1.35, 1.34, 1.36, etc.—until it stabilizes. There’s nothing to worry about.
You need to monitor the temperature closely, as exceeding certain levels can damage the processor. A standard cooler should maintain around 1.35 volts as a safe limit. Adjust the settings based on performance under load with regular clocks, ensuring you're testing at full capacity with benchmarks. This helps confirm the CPU's reliability in extreme conditions.
Ideally, aim for a stable setting before considering overclocking. If temperatures rise too much or voltage spikes, reduce it and revert to previous configurations. Some users prioritize gaming performance by pushing higher clocks and voltages, but this becomes less effective with newer games.
For instance, an i7-4770k needed 4.5Ghz with high voltage for 100°C, but lowering the voltage to 1.28 allowed it to run at 4.3Ghz with manageable heat. An i7-7700k handled 5Ghz with a 4.5Ghz cache but required careful adjustments like de-lidding and custom cooling. Older CPUs might tolerate slightly higher voltages, but modern designs are more sensitive.
Every processor behaves differently—review guides carefully. The risk of failure is real, especially with air cooling. Ultimately, test thoroughly before making changes, and consider the trade-offs between performance and stability.