CPU temperature is at 80 degrees during idle mode.
CPU temperature is at 80 degrees during idle mode.
Hi! Your issue sounds unusual given the current cooling configuration and recent updates. The discrepancy might stem from factors like software settings, background processes, or even a temporary glitch. Since you've already changed paste, fans, and BIOS, it's possible the thermal paste isn't fully adhering or the pump isn't engaging properly. Also, ensure your water cooler is functioning correctly and that the pump speed matches your needs. If the problem persists, try disabling any background apps or checking for firmware updates on your motherboard. Let me know if you'd like further guidance!
It seems like your Windows setup is fresh, so you might want to remount the waterblock and secure all screws evenly in a star pattern, similar to fitting a tire. However, I’m wondering if the update isn’t progressing smoothly—maybe it’s running in the background or handling something else. If the installation was really problematic, you’d likely notice BIOS temperature changes.
I thought it might be related to the updates, but even after doing many changes and restarting several times, nothing improved. Even with less than 10% load, the temps stay high (70-80°C). I’ll try remounting again, though I’ve already done that twice, so I’m not sure it will help this time.
Tell me your specifications, including whether you need a waterblock or AIO setup—maybe a mounting bracket could be useful.
CPU board AMD Ryzen 7 7800X3D paired with MSI PRO B650-P Wi-Fi GPU. Integrated graphics: PNY GeForce RTX 4090 with 24GB GDDR6X RAM. Storage: 2x32GB Corsair Vengeance 6000MHz DDR5 SSD, 2TB WD Blue SN570 NVMe. Power solution: 1000W quiet beater. Cooling: Pure Power 12 M CPU cooler, 360mm Corsair WAK Cooling Hydro H150i iCUE Elite case. Enclosure: NZXT H7 Elite.
I'm not used to Corsair coolers. Did the thermal paste get applied beforehand? What method did you use to secure the hardware on the block?
Have you refreshed the bios on the motherboard? It seems the early versions of most boards had excessive voltage on the x3d chips. Besides that, mounting the cooler further from the CPU die rather than the IO die could make a difference if the issue isn't related to the BIOS.
The AM5 processor features two chips, similar to the AM4 design, but with a layout that includes smaller components visible on the side. The main chip handles input/output functions and generates less heat compared to the larger chip. I recommend moving the cooler to the side of these smaller chips in your setup. Make some adjustments before fully tightening them, and consider placing as much of the AIO cold plate as possible over the smaller ones shown. The green box orientation helps with placement, and the red box marks the chip locations. The temperature reading of 80°C mainly comes from the smaller chip. The video should clarify this better. I hope this assists you.