z390 aorus pro gigabyte z390 aorus pro broken pin issue
z390 aorus pro gigabyte z390 aorus pro broken pin issue
Take a small wire and insert it carefully. No soldering required—just connect it to the CPU pad. Make sure it aligns properly, stays straight, and doesn’t protrude beyond the existing pins. This should get the board working quickly if everything else is fine.
Well, that's a different story. The previous owner bought all the parts for a new PC and attempted to install everything by himself... But it didn't start up. After that, the owner sold the remaining components to another friend and tried to return the board. That's when he discovered the pin was broken and ended up having to fix it himself. Then he handed it over to me.
Search for a budget Celeron G4900 or G4900T. It looks affordable. With one DDR4 stick and an extra hard drive, it might be a low-cost test setup. You caught me off guard! (No ram required.) It’ll likely be an inexpensive upgrade, though you should consider the pin replacement later.
Is there a possibility that a single broken pin could trigger a short circuit or cause damage even to the CheapoCPU? I checked prices for similar items in Romania, and they remain fairly costly compared to typical earnings. In the best scenario, it functions properly and I return it for a better CPU; in the worst, I might end up losing money like the previous owner did.
Thank you for the guidance. To be honest, it wasn't something I considered.
Well, if you end up with a CPU and memory but the board isn't working, look for an affordable motherboard. Ultimately, it's your decision whether to try the build or discard it. The important part is knowing what you're dealing with right before your eyes.