F5F Stay Refreshed Hardware Desktop Your computer remains in sleep state and won't turn on.

Your computer remains in sleep state and won't turn on.

Your computer remains in sleep state and won't turn on.

Pages (2): Previous 1 2
C
coolgirl1566
Member
170
09-19-2023, 05:32 AM
#11
I don't have any issues to fix with my power setup. Fast Startup is usually the first thing I turn off. I've tried reverting back to Windows 10, but the problem persists—it doesn't matter if it's just entering sleep mode or has been there for hours; it won't wake up. It seems like a hardware problem, given that both my CPU and DRAM LED lights up when trying to wake from sleep. The issue started after I switched to AM5. Only the CPU, MOBO, and RAM changed; everything else, including the OS build, remained unchanged.
C
coolgirl1566
09-19-2023, 05:32 AM #11

I don't have any issues to fix with my power setup. Fast Startup is usually the first thing I turn off. I've tried reverting back to Windows 10, but the problem persists—it doesn't matter if it's just entering sleep mode or has been there for hours; it won't wake up. It seems like a hardware problem, given that both my CPU and DRAM LED lights up when trying to wake from sleep. The issue started after I switched to AM5. Only the CPU, MOBO, and RAM changed; everything else, including the OS build, remained unchanged.

S
Spawn377
Member
215
09-20-2023, 03:19 PM
#12
These are S3 circuits that control the power state of the device, allowing it to enter sleep or wake mode.
S
Spawn377
09-20-2023, 03:19 PM #12

These are S3 circuits that control the power state of the device, allowing it to enter sleep or wake mode.

W
WalleGames10
Member
65
09-21-2023, 04:05 PM
#13
yes
W
WalleGames10
09-21-2023, 04:05 PM #13

yes

F
Fr3dFlintst0n3
Junior Member
38
09-22-2023, 12:17 PM
#14
Execute the command to run powecfg with options and capture the output.
F
Fr3dFlintst0n3
09-22-2023, 12:17 PM #14

Execute the command to run powecfg with options and capture the output.

D
Dr_Rey
Junior Member
15
09-26-2023, 12:16 AM
#15
I face the same problem, but my B650i has a 7800x3D setup. It uses 64GB DDR5 with an expo clock of 6000MHz. The only workaround after a random reboot that doesn’t help is using the reset button. After switching from 32GB RAM (two 16GB modules) to 2x32GB, this issue occurs with both configurations.
D
Dr_Rey
09-26-2023, 12:16 AM #15

I face the same problem, but my B650i has a 7800x3D setup. It uses 64GB DDR5 with an expo clock of 6000MHz. The only workaround after a random reboot that doesn’t help is using the reset button. After switching from 32GB RAM (two 16GB modules) to 2x32GB, this issue occurs with both configurations.

N
NooLele
Posting Freak
847
09-26-2023, 04:30 AM
#16
Check USB settings in BIOS to activate devices. Look for the device somewhere. This seems like a frequent issue, but I haven’t had it before—my budget motherboard worked fine.
N
NooLele
09-26-2023, 04:30 AM #16

Check USB settings in BIOS to activate devices. Look for the device somewhere. This seems like a frequent issue, but I haven’t had it before—my budget motherboard worked fine.

L
lizardmentau
Member
59
10-01-2023, 06:33 AM
#17
L
lizardmentau
10-01-2023, 06:33 AM #17

T
Tyler_MC
Member
227
10-01-2023, 08:34 AM
#18
This was my first attempt after trying it on with the keyboard, but it didn’t work. My motherboard isn’t particularly affordable, yet I purchased it about two months later, suggesting a possible power delivery issue. I think the low-quality power supply might be the cause, which also explains why I can’t use EXPO. No matter how I adjust my RAM’s voltage, my PC won’t restart properly and often crashes when I exceed its preset voltage.
T
Tyler_MC
10-01-2023, 08:34 AM #18

This was my first attempt after trying it on with the keyboard, but it didn’t work. My motherboard isn’t particularly affordable, yet I purchased it about two months later, suggesting a possible power delivery issue. I think the low-quality power supply might be the cause, which also explains why I can’t use EXPO. No matter how I adjust my RAM’s voltage, my PC won’t restart properly and often crashes when I exceed its preset voltage.

Pages (2): Previous 1 2