F5F Stay Refreshed Hardware Desktop Your computer isn't showing any output and USB connections aren't functioning.

Your computer isn't showing any output and USB connections aren't functioning.

Your computer isn't showing any output and USB connections aren't functioning.

T
TuPacTaRtiNe
Junior Member
13
10-10-2019, 09:38 PM
#1
Recently my computer stopped functioning unexpectedly. The CPU cooler is operational and the lights are working, but there’s no display or functioning USB ports. The PSU and GPU fans are spinning, yet the screen remains off. Please assist with the Ryzen 7 3700X motherboard.
T
TuPacTaRtiNe
10-10-2019, 09:38 PM #1

Recently my computer stopped functioning unexpectedly. The CPU cooler is operational and the lights are working, but there’s no display or functioning USB ports. The PSU and GPU fans are spinning, yet the screen remains off. Please assist with the Ryzen 7 3700X motherboard.

C
chikimonster
Member
151
10-21-2019, 12:53 AM
#2
GPU plays a role in display problems. Was the system working before? Did you use it at any point? What happened when it stopped working?
C
chikimonster
10-21-2019, 12:53 AM #2

GPU plays a role in display problems. Was the system working before? Did you use it at any point? What happened when it stopped working?

A
AskedRumble52
Member
216
10-21-2019, 11:20 AM
#3
My bad GPU: Gigabyte GeForce GTX 1650 super OC 4G. I started my PC and it crashed, the screen stayed on the Gigabyte startup mode for three hours before I unplugged it because it wouldn’t power off.
A
AskedRumble52
10-21-2019, 11:20 AM #3

My bad GPU: Gigabyte GeForce GTX 1650 super OC 4G. I started my PC and it crashed, the screen stayed on the Gigabyte startup mode for three hours before I unplugged it because it wouldn’t power off.

B
baldebal207
Member
138
10-25-2019, 05:28 AM
#4
I don't have that information. Could you provide the details or check your device documentation?
B
baldebal207
10-25-2019, 05:28 AM #4

I don't have that information. Could you provide the details or check your device documentation?

G
GhostyLite
Member
238
11-05-2019, 11:02 PM
#5
So It didn't POST when you fired it up? Some first things to try: -Clear CMOS. -Full power cycle: Flip switch on PSU, take out cord, hold power button for 10 seconds, plug back in and try to boot. Just to add, there's a button on the back of your motherboard that will clear the CMOS. If I looked up the correct motherboard it's labelled "Q-Flash Plus button". Edited June 3, 2022 by Bianks84 More info
G
GhostyLite
11-05-2019, 11:02 PM #5

So It didn't POST when you fired it up? Some first things to try: -Clear CMOS. -Full power cycle: Flip switch on PSU, take out cord, hold power button for 10 seconds, plug back in and try to boot. Just to add, there's a button on the back of your motherboard that will clear the CMOS. If I looked up the correct motherboard it's labelled "Q-Flash Plus button". Edited June 3, 2022 by Bianks84 More info

L
luukieluke21
Member
180
11-06-2019, 12:15 AM
#6
Tried all possible solutions yet it doesn’t function: pressing Q flash plus and off together turns on the keyboard but no screen appears.
L
luukieluke21
11-06-2019, 12:15 AM #6

Tried all possible solutions yet it doesn’t function: pressing Q flash plus and off together turns on the keyboard but no screen appears.

J
JakeTheTiger
Member
216
11-06-2019, 07:16 AM
#7
that's for updating the bios, not resetting it.. to clear the cmos, remove the battery(cr2032) that looks like a coin on the mobo, while the psu is unplugged. wait 5-10 minutes, then put it back in and power up the pc.
J
JakeTheTiger
11-06-2019, 07:16 AM #7

that's for updating the bios, not resetting it.. to clear the cmos, remove the battery(cr2032) that looks like a coin on the mobo, while the psu is unplugged. wait 5-10 minutes, then put it back in and power up the pc.

W
We_are_beck_4
Junior Member
14
11-07-2019, 08:39 AM
#8
Avoid pressing the buttons simultaneously. Remove the CMOS battery after holding and releasing the power button. After taking it out, ensure the power supply is disconnected and turned off. Press the power button firmly once more for confirmation. Skip using the Q-flash feature. Reinsert all components and check if the device powers on correctly. Edited June 3, 2022 by Bianks84
W
We_are_beck_4
11-07-2019, 08:39 AM #8

Avoid pressing the buttons simultaneously. Remove the CMOS battery after holding and releasing the power button. After taking it out, ensure the power supply is disconnected and turned off. Press the power button firmly once more for confirmation. Skip using the Q-flash feature. Reinsert all components and check if the device powers on correctly. Edited June 3, 2022 by Bianks84

D
Dorito977
Member
177
11-07-2019, 09:55 AM
#9
This explains what q-flash is in a concise manner. A link to the original article is provided.
D
Dorito977
11-07-2019, 09:55 AM #9

This explains what q-flash is in a concise manner. A link to the original article is provided.

N
NautiIus
Junior Member
45
11-07-2019, 03:19 PM
#10
Lol, hopefully the computer was turned off and there wasn’t any extra USB device in the correct port. Thanks for pointing that out! Is this board missing a jumper altogether, or is it hard to locate one?
N
NautiIus
11-07-2019, 03:19 PM #10

Lol, hopefully the computer was turned off and there wasn’t any extra USB device in the correct port. Thanks for pointing that out! Is this board missing a jumper altogether, or is it hard to locate one?