F5F Stay Refreshed Hardware Desktop Your computer isn't powering up.

Your computer isn't powering up.

Your computer isn't powering up.

Pages (2): 1 2 Next
X
73
04-20-2016, 04:23 PM
#1
I purchased a PC and when I pressed the power button, no display or image appeared (no drives detected) and the motherboard showed the number “30.” My graphics card didn’t spin up either. After removing everything and reconnecting, it still doesn’t turn on. Could anyone assist me?
X
XxAnormalKidxX
04-20-2016, 04:23 PM #1

I purchased a PC and when I pressed the power button, no display or image appeared (no drives detected) and the motherboard showed the number “30.” My graphics card didn’t spin up either. After removing everything and reconnecting, it still doesn’t turn on. Could anyone assist me?

F
filcio1234
Member
211
04-26-2016, 11:43 AM
#2
Gather complete system details. Debugging code 30 usually means the system is coming back to life after sleep. It’s not clear if you activated the system and connected the GPU while it was still powered on. That could be risky.
F
filcio1234
04-26-2016, 11:43 AM #2

Gather complete system details. Debugging code 30 usually means the system is coming back to life after sleep. It’s not clear if you activated the system and connected the GPU while it was still powered on. That could be risky.

H
Homonovus_
Junior Member
6
04-30-2016, 07:08 PM
#3
I worked it while the machine was powered on, thinking everything would be okay. A friend who built his own PC reassured me it should be fine, but once I did that the computer wouldn’t shut down. I switched off the power supply and then unplugged it completely. He explained the components and where they fit, but this time nothing turned on at all. The specs listed were an i5 2400 GTX 960 with 8GB DDR3, 1600MHz, 450W, ECS 2013 black series — I’m not sure who made it or why it didn’t work.
H
Homonovus_
04-30-2016, 07:08 PM #3

I worked it while the machine was powered on, thinking everything would be okay. A friend who built his own PC reassured me it should be fine, but once I did that the computer wouldn’t shut down. I switched off the power supply and then unplugged it completely. He explained the components and where they fit, but this time nothing turned on at all. The specs listed were an i5 2400 GTX 960 with 8GB DDR3, 1600MHz, 450W, ECS 2013 black series — I’m not sure who made it or why it didn’t work.

S
Shikadea_hehe
Junior Member
2
04-30-2016, 08:41 PM
#4
Graphics cards don't support hot-plugging. Changing system parts while the computer is running isn't advised at all. Have you checked if this PC functioned correctly before purchasing it? Did you observe it operating? Right now, I recommend taking out the GPU and linking your monitor directly to the motherboard to check for any activity. The GPU might still be alive, or it could have been inactive from the beginning, making it more likely to be non-functional after the action you took.
S
Shikadea_hehe
04-30-2016, 08:41 PM #4

Graphics cards don't support hot-plugging. Changing system parts while the computer is running isn't advised at all. Have you checked if this PC functioned correctly before purchasing it? Did you observe it operating? Right now, I recommend taking out the GPU and linking your monitor directly to the motherboard to check for any activity. The GPU might still be alive, or it could have been inactive from the beginning, making it more likely to be non-functional after the action you took.

K
Kynedee
Posting Freak
784
05-04-2016, 10:08 AM
#5
I'm curious about the exact model and brand of this power supply since I'm concerned about a 450W unit claiming an 80+ Platinum rating.
K
Kynedee
05-04-2016, 10:08 AM #5

I'm curious about the exact model and brand of this power supply since I'm concerned about a 450W unit claiming an 80+ Platinum rating.

M
Marcel2440
Member
138
05-04-2016, 11:53 AM
#6
I’ll attempt to reassemble everything once more, though before purchasing the machine he mentioned it functions properly except for the graphics card fans not turning on at all.
M
Marcel2440
05-04-2016, 11:53 AM #6

I’ll attempt to reassemble everything once more, though before purchasing the machine he mentioned it functions properly except for the graphics card fans not turning on at all.

N
NuclearRavenMC
Junior Member
18
05-21-2016, 05:32 AM
#7
Your PSU model is Antec EA-450 Platinum.
N
NuclearRavenMC
05-21-2016, 05:32 AM #7

Your PSU model is Antec EA-450 Platinum.

G
goldfer1
Member
60
05-21-2016, 02:06 PM
#8
This result indicates it never functioned properly. Initially, only graphics card enthusiasts noticed issues, but after your actions, neither did they.
G
goldfer1
05-21-2016, 02:06 PM #8

This result indicates it never functioned properly. Initially, only graphics card enthusiasts noticed issues, but after your actions, neither did they.

S
SuperTigresss
Posting Freak
768
05-21-2016, 07:22 PM
#9
They briefly spun it before halting, and the motherboard consistently displayed 30. Turning it off removed the GPU, but restarting didn’t help. After installing the GPU while the system was running, all the buttons ceased functioning. I attempted a reset, but nothing occurred. I watched a tutorial and tried jumping the PSU, yet there was no response.
S
SuperTigresss
05-21-2016, 07:22 PM #9

They briefly spun it before halting, and the motherboard consistently displayed 30. Turning it off removed the GPU, but restarting didn’t help. After installing the GPU while the system was running, all the buttons ceased functioning. I attempted a reset, but nothing occurred. I watched a tutorial and tried jumping the PSU, yet there was no response.

K
kleinne_meid
Member
228
05-26-2016, 02:14 AM
#10
Right now it seems like your finances weren’t compromised from the beginning—your mistake came from inserting the GPU too early.
K
kleinne_meid
05-26-2016, 02:14 AM #10

Right now it seems like your finances weren’t compromised from the beginning—your mistake came from inserting the GPU too early.

Pages (2): 1 2 Next