When selecting a GPU to match a non-G Ryzen 5 5500, consider compatibility and performance needs.
When selecting a GPU to match a non-G Ryzen 5 5500, consider compatibility and performance needs.
Tnx, the mentioned card doesn't work with a VGA cable – it supports HDMI and DP only. I require a graphics card that has VGA, HDMI, and DVI-I ports. Please note it's not a DVI-D, just DVI-I.
If you're using Windows 10, you can access your task manager and choose the Performance section to check the installed CPU details. Also, the GT 730 supports outputting to two displays simultaneously on DDR3 models, whereas it outputs to three displays at once on GDDR5 versions. I believe a similar setup applies to the GT 710 GDDR5. You would likely need two GPUs for three or more displays.
Get a DVI-I connector for the graphics card instead of DVI-D. You might also consider purchasing a VGA to DVI-D cable to adapt a DVI-D card to DVI-I.
We pose the questions we ask since information is crucial. If you cannot respond, it becomes extremely hard to offer carefully considered advice.
I'm really sorry, but I got the model name incorrect. The correct one is the ASUS Prime B550M-A.
Are you sure the DVI port is I and not D? You might need a costly active converter if you're converting a DVI-D connection to analog, since DVI-D only transmits digital signals, unlike DVI-I which combines both. The cost of such a converter could be comparable to purchasing another GPU that meets your requirements. Additionally, older low-end GPUs may not handle resolutions above 1440p at 60Hz smoothly across multiple displays. GDDR5 cards are specifically designed as add-on display cards.
The DVI requirement could be making things more difficult. You should be able to connect a modern GPU's DisplayPort to a DVI display using the correct cable. For example:
https://www.amazon.com/Cable-Matters-Dis...9M7UG?th=1
The VGA display is the one that really causes trouble because that port type is mostly outdated. Does that specific display only work with VGA?
The old gtx970 had two DVI-I ports that function with DVI-D and DVI-A, and it can be converted to VGA using a basic $5 adapter.
Absolutely. Unless there are numerous digital outputs running concurrently, these converters should function properly. If multiple outputs are present, an active converter may be necessary.