Upgrade your memory capacity now.
Upgrade your memory capacity now.
Hello, everyone! I'm working on upgrading my RAM but facing some problems. I purchased a set of two 16GB DDR4 modules from Kingston HyperX Renegade, but my PC only runs smoothly when using the XMP profile at 3000MHz. Previously, I had a similar kit with two 8GB units that performed well. Should I just send back the old kit and get something like 3200MHz/CL16? Also, does RAM speed really impact performance so much? Thanks!
No, I don't have access to real-time information about specific hardware or its updates.
Consider replacing your CPU since it improved my RAM performance.
Frequency and response time are crucial for Ryzen processors. Reaching 3600MHz is near the peak performance boost achievable without major adjustments like FCLK changes. 3200MHz remains a solid option, but I expect you can easily upgrade your RAM there with a small overclock. Raising the voltage on the RAM should significantly improve results.
Certainly! Here’s a rephrased version of your text:
Absolutely, 3600c16 is a fraud. It uses identical RAM settings to 3600c18, and Cas doesn’t really improve performance beyond benchmarks. Unless you own a 3600 16-16-16 board, you’re in for decent specs. If you’re looking for better, consider a 2x16 3200c16 or 3600c18 package—they’ll perform much better. Trying to trick you into buying high-end rigs is pointless. Just get a 3600 16-16-16 board. For serious overclocking, invest in a 4x8 setup; most boards with this layout work best that way. Use generic 3600c18 parts, set the frequency between 3800-4000, and fine-tune the primary and subframes. Keep voltages under 1.5V and don’t over-tighten capacitors or decoupling capacitors—this will help avoid issues later. At this frequency range, dual rail options aren’t critical, but avoid accidentally selecting rev b (d9txx) or rev a (d9rxx). Stick to 4 sticks for optimal results. Focus on trfc, trrd-l/s, trc, and tfaw tuning. Don’t push too hard—3800-4000 is still a gentle overclock, so prioritize stability before going all-in.
He can just change the cas latency to 18 to see if it helps otherwise no point in getting 3600 cl18’s
Beyond cost reductions, the price difference between 3600c16 and 3600c18 is significant, especially when performance isn't noticeably better. If you're only saving $15 or less and there are no critical issues for the same price, stick with it unless it has serious problems such as Samsung M die defects. For models with a 16Gb RAM, those are definitely worth keeping. Consider recording a video of the bootloader to check the RAM information.
Sure, I understand. He might need more flexible timing settings so it runs smoothly even under high load, like 3600 cl18, and it shouldn’t fail.