F5F Stay Refreshed Hardware Desktop Threadripper 1950x model discussed. No post, ignoring power button issues, shorting pings, or onboard controls.

Threadripper 1950x model discussed. No post, ignoring power button issues, shorting pings, or onboard controls.

Threadripper 1950x model discussed. No post, ignoring power button issues, shorting pings, or onboard controls.

Pages (2): Previous 1 2
B
Baykugan
Junior Member
Find
9
06-19-2025, 05:19 PM
#11
This helps determine if the problem lies with the motherboard or CPU. Also, check for Q-LED errors on the motherboard if everything seems fine.
Reply
Reply
B
Baykugan
06-19-2025, 05:19 PM #11

This helps determine if the problem lies with the motherboard or CPU. Also, check for Q-LED errors on the motherboard if everything seems fine.

Reply
Reply
F
forgamez
Member
Find
129
06-19-2025, 05:19 PM
#12
Nothing appears on the Q-Led display or in the top-right section for Boot, VGA, CPU, or DRAM. It doesn’t seem to function at all, not even sending a command to initiate... Please let me know.
Reply
Reply
F
forgamez
06-19-2025, 05:19 PM #12

Nothing appears on the Q-Led display or in the top-right section for Boot, VGA, CPU, or DRAM. It doesn’t seem to function at all, not even sending a command to initiate... Please let me know.

Reply
Reply
G
GOALVOLANT
Junior Member
Find
7
06-19-2025, 05:19 PM
#13
Usually, you can check for issues with PCI-e and RAM connectors. This helps confirm whether the device is a genuine motherboard.
Reply
Reply
G
GOALVOLANT
06-19-2025, 05:19 PM #13

Usually, you can check for issues with PCI-e and RAM connectors. This helps confirm whether the device is a genuine motherboard.

Reply
Reply
F
Fretti0_YTB
Member
Find
196
06-19-2025, 05:19 PM
#14
As a general guideline, avoid running the computer without a heatsink on the CPU—it can cause damage. Have you connected power to the additional 4-pin connector for the CPU? I’m not sure if it’s required, but I have this specific CPU/MoBo setup. Were both the motherboard and CPU listed as functioning?
Reply
Reply
F
Fretti0_YTB
06-19-2025, 05:19 PM #14

As a general guideline, avoid running the computer without a heatsink on the CPU—it can cause damage. Have you connected power to the additional 4-pin connector for the CPU? I’m not sure if it’s required, but I have this specific CPU/MoBo setup. Were both the motherboard and CPU listed as functioning?

Reply
Reply
K
krishan8
Junior Member
Find
38
06-19-2025, 05:19 PM
#15
You're missing a cooler attachment. Are you running a test without one? Threadrippers require mounting pressure. Unless you've already attached it, be prepared.
Reply
Reply
K
krishan8
06-19-2025, 05:19 PM #15

You're missing a cooler attachment. Are you running a test without one? Threadrippers require mounting pressure. Unless you've already attached it, be prepared.

Reply
Reply
Pages (2): Previous 1 2