F5F Stay Refreshed Hardware Desktop This processor doesn't support any performance boosts.

This processor doesn't support any performance boosts.

This processor doesn't support any performance boosts.

O
Okeh_
Junior Member
Find
37
11-09-2018, 02:22 PM
#1
I attempted to push my Ryzen 5 2600 overclocked, but I’m struggling to hit 3750MHz on all cores. The best I’ve managed is almost finishing a Cinebench R20 test before the display goes dark. Anyone else experienced this issue or is there something I’m missing? My setup includes the R5 2600, GTX 1660 Super cooler, and ASUS TUF B450 CPU with CX450 PSU, but I’m not reaching the full potential of 16GB Crucial 3200MHz.
Reply
Reply
O
Okeh_
11-09-2018, 02:22 PM #1

I attempted to push my Ryzen 5 2600 overclocked, but I’m struggling to hit 3750MHz on all cores. The best I’ve managed is almost finishing a Cinebench R20 test before the display goes dark. Anyone else experienced this issue or is there something I’m missing? My setup includes the R5 2600, GTX 1660 Super cooler, and ASUS TUF B450 CPU with CX450 PSU, but I’m not reaching the full potential of 16GB Crucial 3200MHz.

Reply
Reply
I
isac6
Junior Member
Find
3
11-09-2018, 03:46 PM
#2
Using a 450W power supply with a peak rating of 450W makes sense. I believe it’s a good idea to get another PSU and test it out.
Reply
Reply
I
isac6
11-09-2018, 03:46 PM #2

Using a 450W power supply with a peak rating of 450W makes sense. I believe it’s a good idea to get another PSU and test it out.

Reply
Reply
L
LarsMatena
Senior Member
Find
602
11-10-2018, 07:01 PM
#3
This suggests the overclock isn't stable due to pushing the CPU beyond safe limits, especially at 150MHz. You're likely misunderstanding the signs—screen going black usually means instability, not just low power. Since you're new, this could be a common misconception.
Reply
Reply
L
LarsMatena
11-10-2018, 07:01 PM #3

This suggests the overclock isn't stable due to pushing the CPU beyond safe limits, especially at 150MHz. You're likely misunderstanding the signs—screen going black usually means instability, not just low power. Since you're new, this could be a common misconception.

Reply
Reply
G
gordo_craftr2
Member
Find
200
11-15-2018, 04:07 AM
#4
It might reduce performance, but stopping at thermtrip would bring the temperature down to around 110°C based on the board. The CPU automatically adjusts its speed. If you reset the CMOS and retest, monitor the temperatures closely.
Reply
Reply
G
gordo_craftr2
11-15-2018, 04:07 AM #4

It might reduce performance, but stopping at thermtrip would bring the temperature down to around 110°C based on the board. The CPU automatically adjusts its speed. If you reset the CMOS and retest, monitor the temperatures closely.

Reply
Reply