F5F Stay Refreshed Hardware Desktop Thermal management and shutdown features for the i9-14900KF processor

Thermal management and shutdown features for the i9-14900KF processor

Thermal management and shutdown features for the i9-14900KF processor

Pages (3): Previous 1 2 3 Next
G
GhostGG
Member
170
09-11-2022, 10:36 AM
#11
I attempted -50 and reached the Windows loading screen, but it stopped at that point.
G
GhostGG
09-11-2022, 10:36 AM #11

I attempted -50 and reached the Windows loading screen, but it stopped at that point.

C
Colefusion
Senior Member
382
09-13-2022, 11:31 PM
#12
Your chip seems to be behaving oddly. Try turning off the e-cores and setting the p-cores to 5GHz with a voltage of 1.4v, then test again. Also, verify the cooling system—ensure your CPU block is correctly installed and that the pump is functioning properly.
C
Colefusion
09-13-2022, 11:31 PM #12

Your chip seems to be behaving oddly. Try turning off the e-cores and setting the p-cores to 5GHz with a voltage of 1.4v, then test again. Also, verify the cooling system—ensure your CPU block is correctly installed and that the pump is functioning properly.

M
mistercraft77
Posting Freak
900
09-14-2022, 12:17 AM
#13
The system started running at 1.4v with all cores disabled and has continued without stopping.
M
mistercraft77
09-14-2022, 12:17 AM #13

The system started running at 1.4v with all cores disabled and has continued without stopping.

P
pablogamer777
Member
50
09-19-2022, 01:19 AM
#14
The temperatures are favorable.
P
pablogamer777
09-19-2022, 01:19 AM #14

The temperatures are favorable.

G
GirlyGamer2013
Junior Member
6
09-19-2022, 06:06 PM
#15
Conditions remain consistent around 37-42 during idle, with minimal fan activity.
G
GirlyGamer2013
09-19-2022, 06:06 PM #15

Conditions remain consistent around 37-42 during idle, with minimal fan activity.

E
Erik51324
Junior Member
30
09-21-2022, 09:09 AM
#16
Is your voltage excessive? What occurs with the stock settings? Otherwise, an 80°C idle indicates the pump isn't functioning properly.
E
Erik51324
09-21-2022, 09:09 AM #16

Is your voltage excessive? What occurs with the stock settings? Otherwise, an 80°C idle indicates the pump isn't functioning properly.

O
Ozwego
Member
191
10-04-2022, 08:25 PM
#17
The voltage was what the motherboard was trying to achieve on its own.
O
Ozwego
10-04-2022, 08:25 PM #17

The voltage was what the motherboard was trying to achieve on its own.

W
Wolfyyy_
Senior Member
358
10-07-2022, 01:43 PM
#18
This indicates your cooling system is functioning adequately, which is positive. It’s likely you don’t need to drive it daily since you’re not reaching full efficiency. Consider boosting the frequency until you’re content with its output, or selectively activate certain e-cores—each has its own frequency and power configuration.
W
Wolfyyy_
10-07-2022, 01:43 PM #18

This indicates your cooling system is functioning adequately, which is positive. It’s likely you don’t need to drive it daily since you’re not reaching full efficiency. Consider boosting the frequency until you’re content with its output, or selectively activate certain e-cores—each has its own frequency and power configuration.

G
Gannisos
Member
73
10-07-2022, 03:53 PM
#19
If it remains idle at 80°C, there must be an issue with the cooling system.
G
Gannisos
10-07-2022, 03:53 PM #19

If it remains idle at 80°C, there must be an issue with the cooling system.

K
killervol22
Junior Member
8
10-07-2022, 08:38 PM
#20
His board was delivering the CPU at 1.6v without modification, and even on a 14900kf it couldn't cope.
K
killervol22
10-07-2022, 08:38 PM #20

His board was delivering the CPU at 1.6v without modification, and even on a 14900kf it couldn't cope.

Pages (3): Previous 1 2 3 Next