F5F Stay Refreshed Software Operating Systems There isn't a straightforward way to completely reload Windows 8.1.

There isn't a straightforward way to completely reload Windows 8.1.

There isn't a straightforward way to completely reload Windows 8.1.

Pages (2): 1 2 Next
I
icemanface
Member
66
12-16-2016, 11:06 AM
#1
I experienced some crashes and chose to restart Windows 8.1. On the blue screen, there was an option to "Refresh Your PC." I loaded the Windows disc and finished the update. Despite this, I’m still facing problems. Could there be another method to reinstall Windows completely? For example, wiping the drives and resetting partitions as I did when installing the OS initially?
I
icemanface
12-16-2016, 11:06 AM #1

I experienced some crashes and chose to restart Windows 8.1. On the blue screen, there was an option to "Refresh Your PC." I loaded the Windows disc and finished the update. Despite this, I’m still facing problems. Could there be another method to reinstall Windows completely? For example, wiping the drives and resetting partitions as I did when installing the OS initially?

D
dazy77
Junior Member
24
01-02-2017, 06:23 AM
#2
They offer a choice to reinstall your computer.
D
dazy77
01-02-2017, 06:23 AM #2

They offer a choice to reinstall your computer.

M
MrKryp
Senior Member
643
01-02-2017, 07:42 PM
#3
If you have the Windows disc, you can go to PC settings -> Update and recovery There's a reinstallation option there.
M
MrKryp
01-02-2017, 07:42 PM #3

If you have the Windows disc, you can go to PC settings -> Update and recovery There's a reinstallation option there.

O
OlafDerSnowMan
Junior Member
46
01-03-2017, 12:41 AM
#4
To avoid concerns about data loss, you can fully erase all partitions as mentioned and then re-partition the drive before installing the operating system. This approach is unnecessary; simply remove the OS partition during setup and continue with a clean installation.
O
OlafDerSnowMan
01-03-2017, 12:41 AM #4

To avoid concerns about data loss, you can fully erase all partitions as mentioned and then re-partition the drive before installing the operating system. This approach is unnecessary; simply remove the OS partition during setup and continue with a clean installation.

R
romerillo7
Junior Member
12
01-03-2017, 02:29 AM
#5
I'm facing problems installing just the Wi-Fi driver from the CD that came with the PC. It wasn't an issue when I first set everything up two days ago. After reinstalling Windows via "refresh my PC," I can't install that driver now, unlike during the initial setup. I'm unsure if some old Windows files are still corrupting things. I'd like to get back to the basics, just like when I first booted up and Windows asked for a partition.
R
romerillo7
01-03-2017, 02:29 AM #5

I'm facing problems installing just the Wi-Fi driver from the CD that came with the PC. It wasn't an issue when I first set everything up two days ago. After reinstalling Windows via "refresh my PC," I can't install that driver now, unlike during the initial setup. I'm unsure if some old Windows files are still corrupting things. I'd like to get back to the basics, just like when I first booted up and Windows asked for a partition.

K
Killerman1834
Posting Freak
885
01-03-2017, 09:16 AM
#6
Restart your PC by pressing Shift and clicking Restart, then keep shifting until the message appears. Alternatively, you can perform a full clean install using a Windows 8.1 ISO.
K
Killerman1834
01-03-2017, 09:16 AM #6

Restart your PC by pressing Shift and clicking Restart, then keep shifting until the message appears. Alternatively, you can perform a full clean install using a Windows 8.1 ISO.

H
Herostare
Member
77
01-13-2017, 02:29 AM
#7
You can easily accomplish that task. Check if the correct driver is available. If you already have one, use it. For a built-in Wi-Fi, get it from the motherboard's CD or download it from the manufacturer's site. It should work without issues.
H
Herostare
01-13-2017, 02:29 AM #7

You can easily accomplish that task. Check if the correct driver is available. If you already have one, use it. For a built-in Wi-Fi, get it from the motherboard's CD or download it from the manufacturer's site. It should work without issues.

P
Postinq
Member
222
01-13-2017, 06:47 PM
#8
I'll begin fresh, as previous actions might have caused complications. I just assembled this new system and everything functioned flawlessly for two days. Then the wireless connection failed. Initially, I didn't give it much thought, but I planned to upgrade the BIOS on the X99 deluxe board to the latest release and address the issue later. The BIOS was updated from version 804 to 1103. Now I investigated the internet problem. It didn't match any issues I'd faced before. No networks were available, which was unusual. After some research, it seemed the network driver wasn't functioning properly. I attempted to reinstall the driver from the CD that came with the board, but it didn't resolve the problem. I decided to use the "restore PC" option in Windows to revert to a time when the internet worked. This is when the real problems emerged. Windows would close abruptly, removing the logo and the spinning dots, before freezing again. I restarted the computer multiple times, but it would freeze once it reached the desktop. Even after a full restart, it would freeze again when I restarted. Eventually, I thought about completely reinstalling Windows. After a full reset, the drivers loaded correctly and the PC restarted as expected during downloads. However, it would freeze again when downloading the drivers, stopping at part 9 of 12. I restarted the PC once more, and then received a message: "Windows detected an issue and requires a restart..." I decided to download each driver separately. It turned out the one causing the freeze was the "bluetooth/wifi driver." I downloaded the latest Wi-Fi driver to a USB drive and transferred it to the new system, but the issue persisted. The problem seems to stem from the BIOS version—1103 versus 804. Why would this cause crashes now but not before? My assumption was that the Windows installation didn't complete properly, unlike the initial setup.
P
Postinq
01-13-2017, 06:47 PM #8

I'll begin fresh, as previous actions might have caused complications. I just assembled this new system and everything functioned flawlessly for two days. Then the wireless connection failed. Initially, I didn't give it much thought, but I planned to upgrade the BIOS on the X99 deluxe board to the latest release and address the issue later. The BIOS was updated from version 804 to 1103. Now I investigated the internet problem. It didn't match any issues I'd faced before. No networks were available, which was unusual. After some research, it seemed the network driver wasn't functioning properly. I attempted to reinstall the driver from the CD that came with the board, but it didn't resolve the problem. I decided to use the "restore PC" option in Windows to revert to a time when the internet worked. This is when the real problems emerged. Windows would close abruptly, removing the logo and the spinning dots, before freezing again. I restarted the computer multiple times, but it would freeze once it reached the desktop. Even after a full restart, it would freeze again when I restarted. Eventually, I thought about completely reinstalling Windows. After a full reset, the drivers loaded correctly and the PC restarted as expected during downloads. However, it would freeze again when downloading the drivers, stopping at part 9 of 12. I restarted the PC once more, and then received a message: "Windows detected an issue and requires a restart..." I decided to download each driver separately. It turned out the one causing the freeze was the "bluetooth/wifi driver." I downloaded the latest Wi-Fi driver to a USB drive and transferred it to the new system, but the issue persisted. The problem seems to stem from the BIOS version—1103 versus 804. Why would this cause crashes now but not before? My assumption was that the Windows installation didn't complete properly, unlike the initial setup.

O
OfficialFreck
Member
71
01-15-2017, 01:59 PM
#9
It looks like your hard drive is having issues. Please try one of these approaches. If it doesn’t resolve the problem, kindly rephrase your request! I’ll do my best to assist further.
O
OfficialFreck
01-15-2017, 01:59 PM #9

It looks like your hard drive is having issues. Please try one of these approaches. If it doesn’t resolve the problem, kindly rephrase your request! I’ll do my best to assist further.

E
eth_mine
Member
53
01-21-2017, 12:10 PM
#10
I executed CHKDSC in safe mode, and the test completed quickly without any errors appearing. Since no report appears after the test, it suggests everything is functioning properly. I'm now running a memory test to check for any potential problems.
E
eth_mine
01-21-2017, 12:10 PM #10

I executed CHKDSC in safe mode, and the test completed quickly without any errors appearing. Since no report appears after the test, it suggests everything is functioning properly. I'm now running a memory test to check for any potential problems.

Pages (2): 1 2 Next