The update from Windows 10 to Windows 10 fails.
The update from Windows 10 to Windows 10 fails.
Attempt to set up Windows on a different machine, then connect the drive that holds the installed system to your current computer. This approach may help clarify the issue, as previous advice about hardware wasn't considered.
I discovered that my hard disk drive is a Samsung SpinPoint P Series HD160JJ 160BG 7.2K SATA model. The link for it is available here: https://www.disctech.com/Samsung-SpinPoi...ard-Drives. However, I’m unable to locate the drivers online. If there’s anything possible, please share it here, as I’m stuck trying to install Windows 10 without help.
It's challenging to assist you effectively. Are there no screenshots provided? Please confirm if you've set up the USB in legacy mode. You won't be able to install Windows in UEFI if the drive was initialized as the main boot device before. Ensure your drive format matches compatibility requirements. Consider using a bootable partition manager to adjust the drive format or prepare the USB for legacy installation. Alternatively, you might want to follow the method I previously mentioned, even if you didn't follow it earlier.
I notice you're planning to test it on another PC. Go ahead and try it.
Formatting issues? Errors during USB setup? Problems while installing Windows? Any of these steps caused trouble? Please clarify more details for a better understanding.