F5F Stay Refreshed Hardware Desktop The temperature is 255 degrees Celsius. Could there be an issue with your sensor?

The temperature is 255 degrees Celsius. Could there be an issue with your sensor?

The temperature is 255 degrees Celsius. Could there be an issue with your sensor?

Pages (2): 1 2 Next
D
duhazneubin
Senior Member
583
02-06-2017, 07:24 PM
#1
Hi, Recently built a system with used components and encountered an issue with my CPU diode temps. Running my CPU under load it apparently hits 255 deg. celsius, which I understand isn't really happening or my rig would melt down at best, but clearly there's an issue there. Ran an AIDA64 stress test and under load my temps hit 255, then the clocks drop to 1600 Mhz, temp drops to about 100s, then frequency goes back to 4 ghz and temp again spikes to 255 deg celsius. I am running an MSI 760GM-23P motherboard with FX-8350 Cpu, cooler is Deepcool Gammaxx GT. Did some digging and on a couple sites found out it could be a manufacturing issue, where this board can't provide the necessary power to the CPU or something like that?. Was wondering if there might be a fix for this particular issue or maybe my sensor is broken/I need to replace my mobo? EDIT: I have updated to the latest BIOS Thanks in advance!
D
duhazneubin
02-06-2017, 07:24 PM #1

Hi, Recently built a system with used components and encountered an issue with my CPU diode temps. Running my CPU under load it apparently hits 255 deg. celsius, which I understand isn't really happening or my rig would melt down at best, but clearly there's an issue there. Ran an AIDA64 stress test and under load my temps hit 255, then the clocks drop to 1600 Mhz, temp drops to about 100s, then frequency goes back to 4 ghz and temp again spikes to 255 deg celsius. I am running an MSI 760GM-23P motherboard with FX-8350 Cpu, cooler is Deepcool Gammaxx GT. Did some digging and on a couple sites found out it could be a manufacturing issue, where this board can't provide the necessary power to the CPU or something like that?. Was wondering if there might be a fix for this particular issue or maybe my sensor is broken/I need to replace my mobo? EDIT: I have updated to the latest BIOS Thanks in advance!

Y
Yoshman2000
Member
180
02-16-2017, 11:46 PM
#2
It seems like there might be an issue with the sensor.
Y
Yoshman2000
02-16-2017, 11:46 PM #2

It seems like there might be an issue with the sensor.

T
TardisImpala
Member
71
02-17-2017, 01:28 AM
#3
Goodbye for physics, I really don’t understand it anymore.
T
TardisImpala
02-17-2017, 01:28 AM #3

Goodbye for physics, I really don’t understand it anymore.

H
husker53
Posting Freak
802
02-18-2017, 07:20 AM
#4
You might consider checking the connection, restarting the device, or consulting the user manual for troubleshooting steps.
H
husker53
02-18-2017, 07:20 AM #4

You might consider checking the connection, restarting the device, or consulting the user manual for troubleshooting steps.

H
Heatonz
Junior Member
4
02-24-2017, 04:53 PM
#5
It seems you're receiving a 32-bit temperature value between 0 and 255. (A temporary reading) Possibly the conversion isn't accurate...
H
Heatonz
02-24-2017, 04:53 PM #5

It seems you're receiving a 32-bit temperature value between 0 and 255. (A temporary reading) Possibly the conversion isn't accurate...

F
foxiflaimeur
Member
110
03-01-2017, 03:08 PM
#6
I mean it's clearly a wrong reading, you could try updating the bios and check if that helps but it could also be broken sensors.
F
foxiflaimeur
03-01-2017, 03:08 PM #6

I mean it's clearly a wrong reading, you could try updating the bios and check if that helps but it could also be broken sensors.

C
creuse02
Member
172
03-01-2017, 04:07 PM
#7
My bios are now current with the latest versions on the MSI website.
C
creuse02
03-01-2017, 04:07 PM #7

My bios are now current with the latest versions on the MSI website.

X
xxsammiesxx
Junior Member
15
03-01-2017, 04:57 PM
#8
Did it resolve the issue with the sensor readings?
X
xxsammiesxx
03-01-2017, 04:57 PM #8

Did it resolve the issue with the sensor readings?

P
Proforno
Member
209
03-01-2017, 07:19 PM
#9
It wasn't necessary to emphasize that the sensor is functioning properly as long as the CPU isn<|pad|>, it handles temperatures well.
P
Proforno
03-01-2017, 07:19 PM #9

It wasn't necessary to emphasize that the sensor is functioning properly as long as the CPU isn<|pad|>, it handles temperatures well.

I
IcemanLFC
Member
175
03-05-2017, 01:38 AM
#10
It might simply be faulty sensors, something we can't really address.
I
IcemanLFC
03-05-2017, 01:38 AM #10

It might simply be faulty sensors, something we can't really address.

Pages (2): 1 2 Next