The system is not functioning properly.

samthebeast07
Junior Member

08-01-2023, 10:15 PM

While assembling the PC, I realized Windows couldn't be installed from a USB stick (it worked on another machine). I used a fresh USB installer, but it failed. I attempted to run Windows from another PC's hard drive and connected it, but that also didn't work. Once installed, the system would freeze and display a black screen with a blinking white bar. I completed the boot sequence.

samthebeast07

08-01-2023, 10:15 PM #1

DinoAndTheMilk
Member

08-05-2023, 11:39 AM

The installation from USB fails due to compatibility issues, incorrect drivers, insufficient storage space, or corrupted files.

DinoAndTheMilk

08-05-2023, 11:39 AM #2

The installation from USB fails due to compatibility issues, incorrect drivers, insufficient storage space, or corrupted files.

SpanjoarPvP
Junior Member

08-06-2023, 05:29 AM

I configured the USB flash drive with Windows, verified the boot sequence in the BIOS/UEFI, and activated USB booting within the UEFI/BIOS settings.

SpanjoarPvP

08-06-2023, 05:29 AM #3

I configured the USB flash drive with Windows, verified the boot sequence in the BIOS/UEFI, and activated USB booting within the UEFI/BIOS settings.

slatometa2
Junior Member

08-06-2023, 07:11 AM

Sure, I did everything as requested.

slatometa2

08-06-2023, 07:11 AM #4

Sure, I did everything as requested.

ZezeGamer
Member

08-06-2023, 07:19 AM

On an old H55 board, a USB drive can install Windows on other computers.

ZezeGamer

08-06-2023, 07:19 AM #5

On an old H55 board, a USB drive can install Windows on other computers.

TheWarlord23
Member

194

08-06-2023, 09:13 AM

I refreshed all system settings, reran the boot sequence, and now I’m prompted to restart and choose the correct boot source or insert storage in the selected device before pressing a key.

TheWarlord23

08-06-2023, 09:13 AM #6

I refreshed all system settings, reran the boot sequence, and now I’m prompted to restart and choose the correct boot source or insert storage in the selected device before pressing a key.

kaden500
Member

08-06-2023, 09:37 AM

The default Windows USB installer runs in UEFI, but the board lacks UEFI support. You might need to use a DVD instead if it can't boot properly from the USB device as Windows requires.

kaden500

08-06-2023, 09:37 AM #7

The default Windows USB installer runs in UEFI, but the board lacks UEFI support. You might need to use a DVD instead if it can't boot properly from the USB device as Windows requires.

Mandi_64
Member

202

08-09-2023, 04:43 AM

Use an older Rufus version to create a USB drive and set the boot option (MBR for vintage motherboards).

Mandi_64

08-09-2023, 04:43 AM #8

Use an older Rufus version to create a USB drive and set the boot option (MBR for vintage motherboards).

MESEZ
Member

188

08-15-2023, 06:25 AM

Thanks, I set it up as a markdown version and it functioned properly.

MESEZ

08-15-2023, 06:25 AM #9

Thanks, I set it up as a markdown version and it functioned properly.