F5F Stay Refreshed Hardware Desktop The PC isn't updating after installing additional RAM.

The PC isn't updating after installing additional RAM.

The PC isn't updating after installing additional RAM.

Pages (3): 1 2 3 Next
L
lil_G_savage
Junior Member
6
02-24-2022, 12:36 PM
#1
You just installed a new RAM module—a Corsair Vengeance 32GB DDR5 6000MHz CL30 Dual Channel set. It matches the previous one in timing. However, when you try to boot with the expo profile and all slots filled, the system doesn’t respond. The memory slots appear, but the process fails. After resetting the CMOS, it still won’t start. The motherboard (Asus TUF GAMING B650-Plus) keeps flashing a yellow light for an extended period before switching to red. I’m really concerned right now.
L
lil_G_savage
02-24-2022, 12:36 PM #1

You just installed a new RAM module—a Corsair Vengeance 32GB DDR5 6000MHz CL30 Dual Channel set. It matches the previous one in timing. However, when you try to boot with the expo profile and all slots filled, the system doesn’t respond. The memory slots appear, but the process fails. After resetting the CMOS, it still won’t start. The motherboard (Asus TUF GAMING B650-Plus) keeps flashing a yellow light for an extended period before switching to red. I’m really concerned right now.

M
Manthing12
Junior Member
4
02-25-2022, 02:27 PM
#2
Tested both pairs separately to verify they function correctly individually. Running at full speed with four sticks usually requires manual adjustments to achieve optimal performance. Allow five minutes after turning on before proceeding, as DDR5 training may take time.
M
Manthing12
02-25-2022, 02:27 PM #2

Tested both pairs separately to verify they function correctly individually. Running at full speed with four sticks usually requires manual adjustments to achieve optimal performance. Allow five minutes after turning on before proceeding, as DDR5 training may take time.

M
mccoop03
Posting Freak
910
02-26-2022, 12:44 PM
#3
Don't worry about the ddr5 and immature memory controllers. Upgrade to the latest BIOS to resolve the issue. Running 4 sticks at expo isn't guaranteed. The 30CL setting might be too restrictive, but 36 should work. Update the BIOS and try again.
M
mccoop03
02-26-2022, 12:44 PM #3

Don't worry about the ddr5 and immature memory controllers. Upgrade to the latest BIOS to resolve the issue. Running 4 sticks at expo isn't guaranteed. The 30CL setting might be too restrictive, but 36 should work. Update the BIOS and try again.

A
Atrilon
Junior Member
2
02-27-2022, 06:46 AM
#4
You completed the task successfully, and everything functions properly. Now you feel a bit more confident since the components are working well. You haven’t needed to set up rams manually before.
A
Atrilon
02-27-2022, 06:46 AM #4

You completed the task successfully, and everything functions properly. Now you feel a bit more confident since the components are working well. You haven’t needed to set up rams manually before.

N
Nevla
Member
207
02-28-2022, 07:37 AM
#5
NTFS works well for updating the BIOS. Yes, it’s a suitable choice.
N
Nevla
02-28-2022, 07:37 AM #5

NTFS works well for updating the BIOS. Yes, it’s a suitable choice.

N
Ninjas_R_OP
Senior Member
743
03-01-2022, 12:19 PM
#6
It is commonly required to use FAT32 format.
N
Ninjas_R_OP
03-01-2022, 12:19 PM #6

It is commonly required to use FAT32 format.

H
halo_rockz27
Junior Member
23
03-05-2022, 04:18 AM
#7
Typically requires a USB 2.0 FAT32 storage device, though the exact model may vary by manufacturer.
H
halo_rockz27
03-05-2022, 04:18 AM #7

Typically requires a USB 2.0 FAT32 storage device, though the exact model may vary by manufacturer.

S
SnathanP
Junior Member
42
03-05-2022, 06:22 AM
#8
I made the updates to the bios, though performance remains inconsistent with the standard options. The RAM speed details are shown below. How would you like to adjust these configurations?
S
SnathanP
03-05-2022, 06:22 AM #8

I made the updates to the bios, though performance remains inconsistent with the standard options. The RAM speed details are shown below. How would you like to adjust these configurations?

B
Bellabell11295
Member
154
03-05-2022, 07:08 AM
#9
I checked all profiles from the AI Tweaker. They are: Expo I, Expo II, and Expo Tweaked. Each has the same schedule—30-36-36-76-1.40V. It’s unclear what distinguishes them, but they’re all inconsistent. I attempted to adjust TCL from 30 to 36 in Expo I, but it remained unstable. I’m unsure if any other settings need changing besides TCL.
B
Bellabell11295
03-05-2022, 07:08 AM #9

I checked all profiles from the AI Tweaker. They are: Expo I, Expo II, and Expo Tweaked. Each has the same schedule—30-36-36-76-1.40V. It’s unclear what distinguishes them, but they’re all inconsistent. I attempted to adjust TCL from 30 to 36 in Expo I, but it remained unstable. I’m unsure if any other settings need changing besides TCL.

B
Broflash
Senior Member
740
03-05-2022, 07:45 AM
#10
These belong to me for my G. Skill 6000CL36 4 sticks...
B
Broflash
03-05-2022, 07:45 AM #10

These belong to me for my G. Skill 6000CL36 4 sticks...

Pages (3): 1 2 3 Next