F5F Stay Refreshed Hardware Desktop The PC fails to boot following the drive.

The PC fails to boot following the drive.

The PC fails to boot following the drive.

S
snoffy
Member
119
05-04-2018, 10:14 AM
#1
After returning from a 45-minute drive, my PC won't turn on. The setup includes an ASUS x470 Prime Pro board with a Ryzen 7 2700X, a Wraith cooler, and various RAM and storage components. I first tried connecting the power button to the case and found it unresponsive. Then I disconnected the PSU and used a paperclip to short the green wire on the motherboard, which caused the fan to spin. It seems the issue might be with the motherboard itself rather than the power supply. I've reconnected everything and tried reseating the RAM, but the graphics card still won't install. Could you help me figure this out? Thank you.
S
snoffy
05-04-2018, 10:14 AM #1

After returning from a 45-minute drive, my PC won't turn on. The setup includes an ASUS x470 Prime Pro board with a Ryzen 7 2700X, a Wraith cooler, and various RAM and storage components. I first tried connecting the power button to the case and found it unresponsive. Then I disconnected the PSU and used a paperclip to short the green wire on the motherboard, which caused the fan to spin. It seems the issue might be with the motherboard itself rather than the power supply. I've reconnected everything and tried reseating the RAM, but the graphics card still won't install. Could you help me figure this out? Thank you.

Z
ZelowS
Member
206
05-07-2018, 04:15 AM
#2
Have you attempted to clear the CMOS settings?
Z
ZelowS
05-07-2018, 04:15 AM #2

Have you attempted to clear the CMOS settings?

M
Muggy215
Member
147
05-07-2018, 01:33 PM
#3
I followed the "check your PSU" instructions. Just before this, I reset the CMOS and it started working again. Thank you for your assistance!
M
Muggy215
05-07-2018, 01:33 PM #3

I followed the "check your PSU" instructions. Just before this, I reset the CMOS and it started working again. Thank you for your assistance!

I
ICHIROfan51
Member
76
05-07-2018, 10:27 PM
#4
When facing issues later, inspecting CMOS and BIOs first is ideal, as it helps avoid accidental damage.
I
ICHIROfan51
05-07-2018, 10:27 PM #4

When facing issues later, inspecting CMOS and BIOs first is ideal, as it helps avoid accidental damage.