F5F Stay Refreshed Hardware Desktop The new rig isn't functioning properly.

The new rig isn't functioning properly.

The new rig isn't functioning properly.

Pages (2): 1 2 Next
K
kalashXKUN
Junior Member
3
06-08-2017, 10:31 AM
#1
Hey everyone, I just assembled a budget gaming rig to play games at 1080p with 60 frames per second. With limited funds, I wanted a decent setup for gaming, but I’m finding it doesn’t quite meet expectations. While watching a benchmark video of someone running Shadow of the Tomb Raider, I noticed their system had an i7 3770 non-K and an RX 480. I upgraded to an Xeon 1230 v2, which should match the i7’s performance but only about 10% lower. I decided to test it myself by running the same benchmark and checked my frame rates. The results weren’t what I hoped for. Here’s what I got: Xeon 1230 v2 stock cooler, RX 580 4G, 8GB RAM, 1333MHz. The benchmark used an i7 3770 non-K, RX 480, 4GB RAM, 1600MHz. I’m surprised my GPU usage was higher than CPU usage at the end, and I saw my CPU hovering around 3492MHz, then jumping to 3592MHz and dropping back down. I also noticed the benchmark forced Ultra Texture, which I didn’t enable since my VRAM is only 4GB and could get saturated. What’s going on here? I know it’s not the best machine, but I feel like it should be running better. What do you think is causing this?
K
kalashXKUN
06-08-2017, 10:31 AM #1

Hey everyone, I just assembled a budget gaming rig to play games at 1080p with 60 frames per second. With limited funds, I wanted a decent setup for gaming, but I’m finding it doesn’t quite meet expectations. While watching a benchmark video of someone running Shadow of the Tomb Raider, I noticed their system had an i7 3770 non-K and an RX 480. I upgraded to an Xeon 1230 v2, which should match the i7’s performance but only about 10% lower. I decided to test it myself by running the same benchmark and checked my frame rates. The results weren’t what I hoped for. Here’s what I got: Xeon 1230 v2 stock cooler, RX 580 4G, 8GB RAM, 1333MHz. The benchmark used an i7 3770 non-K, RX 480, 4GB RAM, 1600MHz. I’m surprised my GPU usage was higher than CPU usage at the end, and I saw my CPU hovering around 3492MHz, then jumping to 3592MHz and dropping back down. I also noticed the benchmark forced Ultra Texture, which I didn’t enable since my VRAM is only 4GB and could get saturated. What’s going on here? I know it’s not the best machine, but I feel like it should be running better. What do you think is causing this?

U
USAirways
Member
157
06-09-2017, 08:36 AM
#2
Yes, you are using the single channel memory.
U
USAirways
06-09-2017, 08:36 AM #2

Yes, you are using the single channel memory.

A
Apple_kun
Junior Member
34
06-09-2017, 04:03 PM
#3
Dual channel or that's what the CPU Z indicates, one memory runs at 1333MHz while the other is at 1600MHz, downclocked to 1333MHz
A
Apple_kun
06-09-2017, 04:03 PM #3

Dual channel or that's what the CPU Z indicates, one memory runs at 1333MHz while the other is at 1600MHz, downclocked to 1333MHz

H
heroboy17
Senior Member
528
06-25-2017, 05:41 PM
#4
Find the correct GPU speed.
H
heroboy17
06-25-2017, 05:41 PM #4

Find the correct GPU speed.

S
solaplexHD
Member
81
06-26-2017, 12:26 AM
#5
Sorry, I don't get it.
S
solaplexHD
06-26-2017, 12:26 AM #5

Sorry, I don't get it.

S
Sniper312x
Member
114
06-26-2017, 05:01 AM
#6
When your GPU operates at 1300MHz while another is boosted to 1450MHz, a 10% variation is completely typical.
S
Sniper312x
06-26-2017, 05:01 AM #6

When your GPU operates at 1300MHz while another is boosted to 1450MHz, a 10% variation is completely typical.

N
Nakkisoppa
Member
50
07-04-2017, 12:30 AM
#7
The GPU is operating at 1400 while the CPU is running at 200 MHz slower than its speed.
N
Nakkisoppa
07-04-2017, 12:30 AM #7

The GPU is operating at 1400 while the CPU is running at 200 MHz slower than its speed.

P
poler199
Member
74
07-08-2017, 03:19 AM
#8
Verify PCIe x16 support, run GPU-Z, apply GPU load
P
poler199
07-08-2017, 03:19 AM #8

Verify PCIe x16 support, run GPU-Z, apply GPU load

S
sugaapie
Junior Member
29
07-21-2017, 08:24 PM
#9
It is operating on X16
S
sugaapie
07-21-2017, 08:24 PM #9

It is operating on X16

Z
zara1219
Junior Member
37
07-23-2017, 03:21 AM
#10
The processor limits the GPU performance. You have to either push it beyond its limits for extra speed or let it run quietly. The GPU's speed isn't a factor when the processor is running old and worn out.
Z
zara1219
07-23-2017, 03:21 AM #10

The processor limits the GPU performance. You have to either push it beyond its limits for extra speed or let it run quietly. The GPU's speed isn't a factor when the processor is running old and worn out.

Pages (2): 1 2 Next