F5F Stay Refreshed Hardware Desktop The laptop cooler moves unexpectedly, climbing higher than expected.

The laptop cooler moves unexpectedly, climbing higher than expected.

The laptop cooler moves unexpectedly, climbing higher than expected.

Pages (3): 1 2 3 Next
G
GavCrafters
Member
68
03-21-2023, 09:28 AM
#1
My laptop is acting odd, the cooling fan speed rises steadily even when I'm not using much load or heat. It runs an Asus TUF Dash F15 i7 with an RTX 3070 at 85 watts, 16GB RAM (two 8GB modules), 3200Mhz RAM, and a 512GB NVMe SSD. The fan noise increases noticeably after about five minutes of light tasks like YouTube or spreadsheets. To fix it, I change the power profile every five minutes, bringing the fan back down to near zero RPM. No matter whether I switch between Turbo and Eco settings or vice versa, the fan drops again shortly after. Temperatures are acceptable, but the RPM fluctuations persist. I've tried replacing the thermal paste and adjusting the pads, even suspecting a failing VRM, but it didn't help. I also replaced the stock thermal paste and cleaned the heat pads, thinking a VRM might be overheating. The issue remains unresolved. Switching the GPU to an iGPU or vice versa didn't help. My BIOS and Windows are up to date, though I encountered problems with the original OEM install. No manual fan control options exist; even after a fresh Windows install and installing Armoury Crate, the problem persists. I've tried everything and still can't find a solution. Thanks for your help!
G
GavCrafters
03-21-2023, 09:28 AM #1

My laptop is acting odd, the cooling fan speed rises steadily even when I'm not using much load or heat. It runs an Asus TUF Dash F15 i7 with an RTX 3070 at 85 watts, 16GB RAM (two 8GB modules), 3200Mhz RAM, and a 512GB NVMe SSD. The fan noise increases noticeably after about five minutes of light tasks like YouTube or spreadsheets. To fix it, I change the power profile every five minutes, bringing the fan back down to near zero RPM. No matter whether I switch between Turbo and Eco settings or vice versa, the fan drops again shortly after. Temperatures are acceptable, but the RPM fluctuations persist. I've tried replacing the thermal paste and adjusting the pads, even suspecting a failing VRM, but it didn't help. I also replaced the stock thermal paste and cleaned the heat pads, thinking a VRM might be overheating. The issue remains unresolved. Switching the GPU to an iGPU or vice versa didn't help. My BIOS and Windows are up to date, though I encountered problems with the original OEM install. No manual fan control options exist; even after a fresh Windows install and installing Armoury Crate, the problem persists. I've tried everything and still can't find a solution. Thanks for your help!

I
Im_Ban_evading
Junior Member
20
03-21-2023, 09:28 AM
#2
Bios typically include the fan curve settings.
I
Im_Ban_evading
03-21-2023, 09:28 AM #2

Bios typically include the fan curve settings.

S
Skysel
Member
71
03-21-2023, 09:28 AM
#3
No need for fan curves, just keeping an eye on things.
S
Skysel
03-21-2023, 09:28 AM #3

No need for fan curves, just keeping an eye on things.

K
Kamikaze_007
Senior Member
625
03-21-2023, 09:28 AM
#4
You should be able to choose Manual next to Turbo, allowing you to adjust fan curves for CPU and GPU along with power settings. Consider verifying the connection, switching GPU modes, or updating/downgrading Armoury Crate.
K
Kamikaze_007
03-21-2023, 09:28 AM #4

You should be able to choose Manual next to Turbo, allowing you to adjust fan curves for CPU and GPU along with power settings. Consider verifying the connection, switching GPU modes, or updating/downgrading Armoury Crate.

M
mikey20049
Junior Member
4
03-21-2023, 09:28 AM
#5
I also faced the same issue, but it resolved on hp.it after updating the drivers and software.
M
mikey20049
03-21-2023, 09:28 AM #5

I also faced the same issue, but it resolved on hp.it after updating the drivers and software.

_
_SIRENDER_
Member
146
03-21-2023, 09:28 AM
#6
Yes, that's the fancurve.
_
_SIRENDER_
03-21-2023, 09:28 AM #6

Yes, that's the fancurve.

M
maphantom
Member
70
03-21-2023, 09:28 AM
#7
I press double click and it doesn't work; the graph only shows temperature and voltage, not fan speeds.
M
maphantom
03-21-2023, 09:28 AM #7

I press double click and it doesn't work; the graph only shows temperature and voltage, not fan speeds.

D
ditox95
Member
234
03-21-2023, 09:28 AM
#8
Nothing found here. This update comes after a full Windows reinstall and reapplying the Armory Crate software. Many features missing in my 2021 TUF compared to the newer 2022 versions.
D
ditox95
03-21-2023, 09:28 AM #8

Nothing found here. This update comes after a full Windows reinstall and reapplying the Armory Crate software. Many features missing in my 2021 TUF compared to the newer 2022 versions.

J
joeyjrm
Junior Member
15
03-21-2023, 09:28 AM
#9
You set the chipset drivers correctly.
J
joeyjrm
03-21-2023, 09:28 AM #9

You set the chipset drivers correctly.

K
Kayla_Senpapi
Junior Member
3
03-21-2023, 09:28 AM
#10
This update is clearly intended for the fan curve.
K
Kayla_Senpapi
03-21-2023, 09:28 AM #10

This update is clearly intended for the fan curve.

Pages (3): 1 2 3 Next