F5F Stay Refreshed Hardware Desktop The hard drive makes sounds every ten minutes.

The hard drive makes sounds every ten minutes.

The hard drive makes sounds every ten minutes.

Pages (2): 1 2 Next
_
_TemckinYT_
Member
108
08-21-2016, 11:59 PM
#1
Hello. Every ten minutes my computer's HDD starts producing a continuous noise (like the head hitting the side). It's a Seagate Iron Wolf 4TB drive. I returned it and received a replacement, but the issue persists. I've updated the drivers and moved the SATA cable to another port, yet it doesn't work. The only solution seems to be using Disk Management, where the noise stops instantly, but it returns after about ten minutes. I think this could be related to a new installation setting. Also, I recorded the sound. Anyone can assist? Thank you. 20250721_163048.mp4
_
_TemckinYT_
08-21-2016, 11:59 PM #1

Hello. Every ten minutes my computer's HDD starts producing a continuous noise (like the head hitting the side). It's a Seagate Iron Wolf 4TB drive. I returned it and received a replacement, but the issue persists. I've updated the drivers and moved the SATA cable to another port, yet it doesn't work. The only solution seems to be using Disk Management, where the noise stops instantly, but it returns after about ten minutes. I think this could be related to a new installation setting. Also, I recorded the sound. Anyone can assist? Thank you. 20250721_163048.mp4

S
sacapatates
Posting Freak
843
08-22-2016, 01:15 AM
#2
It seems the system is experiencing issues. Retrieve disk details and check drive health. If problems are found, replace the HDD. Otherwise, it appears normal despite noise. Also, use Crystal Disk Mark to assess performance quality.
S
sacapatates
08-22-2016, 01:15 AM #2

It seems the system is experiencing issues. Retrieve disk details and check drive health. If problems are found, replace the HDD. Otherwise, it appears normal despite noise. Also, use Crystal Disk Mark to assess performance quality.

D
DDotty2
Member
223
08-23-2016, 12:57 AM
#3
I can’t post images directly, but I can guide you through the process. Use CrystalDiskInfo to capture the SMART table from your drive, then share the screenshot here. Regarding your question, if the replacement still makes the same noise, it might indicate a hardware issue rather than just a defective unit—consider checking the drive’s warranty or contacting support for further advice.
D
DDotty2
08-23-2016, 12:57 AM #3

I can’t post images directly, but I can guide you through the process. Use CrystalDiskInfo to capture the SMART table from your drive, then share the screenshot here. Regarding your question, if the replacement still makes the same noise, it might indicate a hardware issue rather than just a defective unit—consider checking the drive’s warranty or contacting support for further advice.

H
herobrine3959
Senior Member
443
08-23-2016, 01:06 AM
#4
Consider turning off APM for this drive. If that fails, switch to another PSU connector and SATA connector. If neither resolves the issue, it might be a software problem or a failing drive.
H
herobrine3959
08-23-2016, 01:06 AM #4

Consider turning off APM for this drive. If that fails, switch to another PSU connector and SATA connector. If neither resolves the issue, it might be a software problem or a failing drive.

D
Darkaimonds
Member
74
08-23-2016, 02:16 AM
#5
Harddrives might produce noise while an application accesses SMART information from them. If this happens regularly—every 10 minutes—an app running in the background could refresh at the same interval. It’s possible such software only checks temperatures on various computer components, and when it reads a hard drive’s SMART data, it retrieves that specific information.
D
Darkaimonds
08-23-2016, 02:16 AM #5

Harddrives might produce noise while an application accesses SMART information from them. If this happens regularly—every 10 minutes—an app running in the background could refresh at the same interval. It’s possible such software only checks temperatures on various computer components, and when it reads a hard drive’s SMART data, it retrieves that specific information.

P
Pokeimu
Junior Member
5
08-23-2016, 04:21 AM
#6
I didn't notice you changed the PSU connector. For turning off APM there isn't a specific option for drives—check your BIOS or motherboard manual.
P
Pokeimu
08-23-2016, 04:21 AM #6

I didn't notice you changed the PSU connector. For turning off APM there isn't a specific option for drives—check your BIOS or motherboard manual.

Y
YasJawnSlayXD
Member
91
08-26-2016, 03:02 PM
#7
Could you check if there’s a feature to look up the app name? Appreciate your help!
Y
YasJawnSlayXD
08-26-2016, 03:02 PM #7

Could you check if there’s a feature to look up the app name? Appreciate your help!

_
_TrapBoy_
Member
224
09-02-2016, 08:49 PM
#8
I added a minor change to my previous version to confirm they wouldn’t resend it. Also, I shared the screenshot you referenced.
_
_TrapBoy_
09-02-2016, 08:49 PM #8

I added a minor change to my previous version to confirm they wouldn’t resend it. Also, I shared the screenshot you referenced.

W
WitherDerp
Junior Member
39
09-03-2016, 01:14 AM
#9
Both hard drives were brand new, and after checking their health status, everything looked fine. The silence when I press the button feels abrupt, but it comes back after about ten minutes. It’s really confusing to hear nothing at all, then suddenly it starts again.
W
WitherDerp
09-03-2016, 01:14 AM #9

Both hard drives were brand new, and after checking their health status, everything looked fine. The silence when I press the button feels abrupt, but it comes back after about ten minutes. It’s really confusing to hear nothing at all, then suddenly it starts again.

C
CyberZ
Junior Member
20
09-03-2016, 01:57 AM
#10
Access CrystalDiskInfo, navigate to Advanced Features, then APM Control. Choose the hard drive you wish to mute and turn off APM.
C
CyberZ
09-03-2016, 01:57 AM #10

Access CrystalDiskInfo, navigate to Advanced Features, then APM Control. Choose the hard drive you wish to mute and turn off APM.

Pages (2): 1 2 Next