The GPU's memory frequently resets to -201MHz during the application of OC.
The GPU's memory frequently resets to -201MHz during the application of OC.
AtomicGPU :
AtomicGPU :
AtomicGPU :
AtomicGPU :
AtomicGPU :
Sorry, I don’t understand what to say. I’m facing the same issue with my 750ti. I just use the stock speed and manage it.
I can’t use the stock speed either! When I set it to default, everything returns to normal except for memory, which remains stuck at -201mhz on the slider.
Maybe reinstalling the software completely would help.
I’ve tried that already, not even once. Still no improvement.
Could you help figure out what caused it to freeze like this? What happened before it got stuck?
The only thing I can think of is that I overclocked it once and checked its limits. It froze at +150 to the core and had to be restarted. After that, I lowered it to +130 and it worked fine.
I was always running two overclocking tools at the same time (OC Guru 2 – just for lighting color change – and Precision X), but this started after I removed all of them and used only Afterburner.
Did the card come with any software? Did you install Precision X, or was it included?
AtomicGPU :
AtomicGPU :
AtomicGPU :
AtomicGPU :
AtomicGPU :
I’m stuck with the same issue, especially with my 750ti. I just run at the stock speed and manage to cope.
I can’t use the stock speed either! When I set it to default, everything returns to normal except for memory, which remains stuck at -201mhz on the slider.
Maybe a complete reinstall is needed.
I’ve tried that already, not even once, and it’s still not working.
Could you help figure out what caused this problem? What events led up to it?
The only thing I can recall is that I overclocked once and checked its limits. It froze at +150 to the core and had to be restarted. After that, I lowered it to +130 and it became stable.
I was always running two overclocking tools at the same time (OC Guru 2 – just for lighting color change, and Precision X), but this started after I removed all of them and used only Afterburner.
Did the card come with any software? Did I install Precision X by mistake?
I did a fresh Windows 10 installation about a month and a half ago, but it kept happening a few days later.
Just stick to Precision X as before.
AtomicGPU :
AtomicGPU :
AtomicGPU :
AtomicGPU :
AtomicGPU :
AtomicGPU :
Sorry, I don’t understand what to say. I’m facing the same issue with my 750ti. I just run at the stock speed and manage to cope.
I can’t use the stock speed either! When I set it to default, everything returns to normal except for memory, which remains stuck at -201mhz on the slider.
Would you consider what might have triggered this problem? What events led up to it?
The only thing that comes to mind is that I once overclocked it and checked its limits. It froze at +150 to the core and had to be restarted. After that, I lowered it to +130 and it became very stable.
I actually always ran two overclocking tools simultaneously (OC Guru 2 – just for changing lighting color – and Precision X), but this started after I removed all of them and used only Afterburner.
Did the card come with any software?
It came with Precision X, right?
The issue began when I uninstalled Precision X and OC Guru 2 and attempted to overclock it with Afterburner.
Do you have a restore point available for that machine?
I recently reinstalled Windows 10 about 1.5 months ago, but the problem continued for a few days afterward.
Just stick with Precision X as before.
That was my plan too, but it keeps happening even with Precision X now.
AtomicGPU :
AtomicGPU :
AtomicGPU :
AtomicGPU :
AtomicGPU :
AtomicGPU :
Sorry, I don’t understand what to say. I’m facing the same issue with my 750ti. I just run at the stock speed and manage to cope.
I can’t use the stock speed either! When I set it to default, everything returns to normal except for memory, which remains stuck at -201mhz on the slider.
Would you suggest a complete reinstallation?
I’ve tried that already, not even once. Still no improvement.
Could you help figure out what caused this problem? What events led up to it?
The only thing that comes to mind is that I overclocked once and checked its limits. It froze at +150 to the core and had to be restarted. After that, I lowered it to +130 and it became stable.
I was always running two overclocking tools at the same time (OC Guru 2 – just for lighting color change – and Precision X), but this started after I removed all of them and used only Afterburner.
Did the card come with any software?
It came with Precision X, right?
The problem began when I uninstalled Precision X and OC Guru 2 and attempted to overclock it with Afterburner.
Do you have a restore point for that machine?
I recently reinstalled Windows 10 about 1.5 months ago, but the issue kept recurring a few days later.
Just stick with Precision X as before.
That was my plan too, but it continues even with Precision X.
It seems like a hardware problem might be involved.