F5F Stay Refreshed Hardware Desktop The computer operates normally, yet the screen remains inactive.

The computer operates normally, yet the screen remains inactive.

The computer operates normally, yet the screen remains inactive.

Pages (3): Previous 1 2 3 Next
R
RulwenJr
Posting Freak
786
09-10-2017, 11:50 PM
#11
After it rings, the lock indicators turn on on December 22, 2022 at 00:25:03.
R
RulwenJr
09-10-2017, 11:50 PM #11

After it rings, the lock indicators turn on on December 22, 2022 at 00:25:03.

D
DrBsTigger
Member
59
09-11-2017, 02:38 AM
#12
it seems this problem often appears in gb boards. some viewers mentioned resetting the bios fixed it. you could reset by shorting the two pins near the front panel connector, as shown on their website (very careful). check around the f-panel near that capacitor or the one next to the cmos battery—there might be instructions there. if you can't locate them, remove the cmos battery and wait about 10-20 minutes.
D
DrBsTigger
09-11-2017, 02:38 AM #12

it seems this problem often appears in gb boards. some viewers mentioned resetting the bios fixed it. you could reset by shorting the two pins near the front panel connector, as shown on their website (very careful). check around the f-panel near that capacitor or the one next to the cmos battery—there might be instructions there. if you can't locate them, remove the cmos battery and wait about 10-20 minutes.

J
Jostorak
Member
235
09-11-2017, 09:17 AM
#13
It seems the issue might be with your HDMI cable or port configuration. The RX 580 supports two HDMI ports—switch to a different one and see if the TV works with three ports. We can eliminate everything except the GPU, which appears to be in good condition since the PC boots normally on modern boards. A final check for the GPU is also done, but I’m not certain that’s the problem here.
J
Jostorak
09-11-2017, 09:17 AM #13

It seems the issue might be with your HDMI cable or port configuration. The RX 580 supports two HDMI ports—switch to a different one and see if the TV works with three ports. We can eliminate everything except the GPU, which appears to be in good condition since the PC boots normally on modern boards. A final check for the GPU is also done, but I’m not certain that’s the problem here.

M
MineArqueiro
Member
237
09-14-2017, 08:52 AM
#14
I handle it more efficiently with my friend Lenovo Thinkpad, which features an Express card slot for PCIe. It functions flawlessly and the new GPU has already been tried on his PC. I did this last night to identify the faulty part.
M
MineArqueiro
09-14-2017, 08:52 AM #14

I handle it more efficiently with my friend Lenovo Thinkpad, which features an Express card slot for PCIe. It functions flawlessly and the new GPU has already been tried on his PC. I did this last night to identify the faulty part.

L
LEOVIE13
Member
65
09-17-2017, 04:12 AM
#15
I have a power supply and I'm connecting the RX 580 via an XMP PCIe adapter that uses Molex connectors.
L
LEOVIE13
09-17-2017, 04:12 AM #15

I have a power supply and I'm connecting the RX 580 via an XMP PCIe adapter that uses Molex connectors.

R
rageparade
Junior Member
31
10-04-2017, 11:56 AM
#16
Was die Motherboard PCIe und der GPU nur mit PCIe Generation 1.1 und höher kompatibel? Haben Sie es schon einmal auf diesem System laufen lassen?
R
rageparade
10-04-2017, 11:56 AM #16

Was die Motherboard PCIe und der GPU nur mit PCIe Generation 1.1 und höher kompatibel? Haben Sie es schon einmal auf diesem System laufen lassen?

T
TayPlaysMC
Member
91
10-04-2017, 04:11 PM
#17
In fact, I've been able to utilize the GPU in this setup for roughly a month using the Exact FX 8320.
T
TayPlaysMC
10-04-2017, 04:11 PM #17

In fact, I've been able to utilize the GPU in this setup for roughly a month using the Exact FX 8320.

B
Bozzgaming1
Junior Member
3
10-04-2017, 05:16 PM
#18
The 700-watt power supply provided two groups of eight PCIe connectors.
B
Bozzgaming1
10-04-2017, 05:16 PM #18

The 700-watt power supply provided two groups of eight PCIe connectors.

C
CocaCola15
Senior Member
603
10-12-2017, 10:42 AM
#19
No, I haven't cleared the CMOS yet.
C
CocaCola15
10-12-2017, 10:42 AM #19

No, I haven't cleared the CMOS yet.

G
Gaspoda
Member
246
10-12-2017, 11:35 AM
#20
Tried it recently, not working yet, ready to place an order for a used model.
G
Gaspoda
10-12-2017, 11:35 AM #20

Tried it recently, not working yet, ready to place an order for a used model.

Pages (3): Previous 1 2 3 Next