F5F Stay Refreshed Hardware Desktop The computer isn't turning on.

The computer isn't turning on.

The computer isn't turning on.

Pages (3): Previous 1 2 3 Next
D
Dead_pool_
Junior Member
19
12-21-2016, 10:19 AM
#11
The computer was powered on after testing some settings, used the touchpad for over 12 hours without turning it off, and eventually shut down. I’m still unsure what happened.
D
Dead_pool_
12-21-2016, 10:19 AM #11

The computer was powered on after testing some settings, used the touchpad for over 12 hours without turning it off, and eventually shut down. I’m still unsure what happened.

E
eskzz
Posting Freak
909
12-23-2016, 06:04 AM
#12
CPU and GPU temperatures are typical during operation. Check the Event Viewer for system logs that may indicate overheating or performance issues.
E
eskzz
12-23-2016, 06:04 AM #12

CPU and GPU temperatures are typical during operation. Check the Event Viewer for system logs that may indicate overheating or performance issues.

0
0ZeroGaming0
Member
152
12-23-2016, 08:31 AM
#13
From what you recall, the CPU and GPU temperatures stay within normal ranges and rarely exceed the average. The latest entry in the even viewer usually indicated a power cutout, though I’m unable to verify at the moment because the system isn’t responding.
0
0ZeroGaming0
12-23-2016, 08:31 AM #13

From what you recall, the CPU and GPU temperatures stay within normal ranges and rarely exceed the average. The latest entry in the even viewer usually indicated a power cutout, though I’m unable to verify at the moment because the system isn’t responding.

O
Omarhh
Member
217
12-24-2016, 01:11 PM
#14
It seems the GPU isn't turning on at all, and the CPU hasn't been functioning properly recently. The temperatures were consistently high, averaging between 50 to 60 degrees.
O
Omarhh
12-24-2016, 01:11 PM #14

It seems the GPU isn't turning on at all, and the CPU hasn't been functioning properly recently. The temperatures were consistently high, averaging between 50 to 60 degrees.

D
duhazneubin
Senior Member
583
12-24-2016, 01:52 PM
#15
Here are the only system logs recorded after the PC shut down by itself, showing your CPU and GPU temperatures.
D
duhazneubin
12-24-2016, 01:52 PM #15

Here are the only system logs recorded after the PC shut down by itself, showing your CPU and GPU temperatures.

R
Ryanmon
Member
200
01-01-2017, 12:00 AM
#16
Now im currently waiting for new mobo to arrive hopefully is the motherboard causing problem
R
Ryanmon
01-01-2017, 12:00 AM #16

Now im currently waiting for new mobo to arrive hopefully is the motherboard causing problem

T
TangledDancer
Junior Member
5
01-08-2017, 04:37 PM
#17
Ugh, I wasn't able to check the site because it wasn't updated. Sorry about that! But honestly, if none of these options work, going with the team is the best choice.
T
TangledDancer
01-08-2017, 04:37 PM #17

Ugh, I wasn't able to check the site because it wasn't updated. Sorry about that! But honestly, if none of these options work, going with the team is the best choice.

_
_SaltySophie
Junior Member
35
01-14-2017, 07:28 PM
#18
Received the motherboard, moved all components to another board. Powered it on initially, it started but no display appeared. It repeatedly shut down and restarted until showing some output on the screen. I plan to run it for a short period to check if it will stop.
_
_SaltySophie
01-14-2017, 07:28 PM #18

Received the motherboard, moved all components to another board. Powered it on initially, it started but no display appeared. It repeatedly shut down and restarted until showing some output on the screen. I plan to run it for a short period to check if it will stop.

M
Mr_Floobiful
Posting Freak
890
01-21-2017, 11:50 PM
#19
It was observed that the PC doesn't use dual-channel connectivity, yet it starts up successfully on alternative channels—A1 is functioning well while A2 is not.
M
Mr_Floobiful
01-21-2017, 11:50 PM #19

It was observed that the PC doesn't use dual-channel connectivity, yet it starts up successfully on alternative channels—A1 is functioning well while A2 is not.

A
152
01-22-2017, 01:16 AM
#20
eh, this feels like having to reinstall everything every time something goes wrong... i own an MSI B350M bought in 2017. it's been used a lot over the years with overclocking. it still works fine and costs only about 60 dollars (which is really cheap). probably the RAM or PCIe slot got dirty, the CMOS battery died, or some cables came loose, etc. same goes for people whose CPUs stopped working—cpus usually don’t just fail completely. it’s more likely there were compatibility issues or improper installation, which is why the new CPU suddenly started (changing another part would have had the same effect). also, windows 10 from 2017 is still running smoothly!
A
alondra_malfoy
01-22-2017, 01:16 AM #20

eh, this feels like having to reinstall everything every time something goes wrong... i own an MSI B350M bought in 2017. it's been used a lot over the years with overclocking. it still works fine and costs only about 60 dollars (which is really cheap). probably the RAM or PCIe slot got dirty, the CMOS battery died, or some cables came loose, etc. same goes for people whose CPUs stopped working—cpus usually don’t just fail completely. it’s more likely there were compatibility issues or improper installation, which is why the new CPU suddenly started (changing another part would have had the same effect). also, windows 10 from 2017 is still running smoothly!

Pages (3): Previous 1 2 3 Next