F5F Stay Refreshed Hardware Desktop The computer is not turning on.

The computer is not turning on.

The computer is not turning on.

Pages (2): Previous 1 2
Y
yJaaoxD
Member
203
03-26-2017, 03:45 PM
#11
Have you explored the 8 pin connector as well?
Y
yJaaoxD
03-26-2017, 03:45 PM #11

Have you explored the 8 pin connector as well?

G
Gratoxx
Junior Member
34
03-27-2017, 12:07 AM
#12
I just removed the 8 Pin connector custom sleeve and tried using it without it, reinserted the 24 pin connector, but the problem persists. I reset the CMOS again and still nothing.
G
Gratoxx
03-27-2017, 12:07 AM #12

I just removed the 8 Pin connector custom sleeve and tried using it without it, reinserted the 24 pin connector, but the problem persists. I reset the CMOS again and still nothing.

H
HubX
Junior Member
22
03-31-2017, 09:46 PM
#13
SOLVED!!!!!!! I'm still unsure what it was, but I went shopping and found an Electrical Contact Cleaner. I thought I'd give it a shot, got home and sprayed it onto the 24 pin, 8 pin connector and motherboard. A few hours later, I tried it and it worked perfectly! Thanks for all the help, really appreciated!!
H
HubX
03-31-2017, 09:46 PM #13

SOLVED!!!!!!! I'm still unsure what it was, but I went shopping and found an Electrical Contact Cleaner. I thought I'd give it a shot, got home and sprayed it onto the 24 pin, 8 pin connector and motherboard. A few hours later, I tried it and it worked perfectly! Thanks for all the help, really appreciated!!

P
ProSkipperz
Member
129
04-01-2017, 04:17 AM
#14
Awesome
P
ProSkipperz
04-01-2017, 04:17 AM #14

Awesome

C
Carterpaul
Junior Member
11
04-07-2017, 04:03 AM
#15
However there’s another problem unfortunately, the motherboard provides two display outputs—DVI and VGA—but there’s no signal from the GPU, and the DVI cable to HDMI I have from the motherboard isn’t working. I don’t have a VGA monitor to test this option, and I’m not sure what to do now. The CMOS won’t help either; I’m trying to figure out a solution right now. If you have any ideas, it would be great 🙏
C
Carterpaul
04-07-2017, 04:03 AM #15

However there’s another problem unfortunately, the motherboard provides two display outputs—DVI and VGA—but there’s no signal from the GPU, and the DVI cable to HDMI I have from the motherboard isn’t working. I don’t have a VGA monitor to test this option, and I’m not sure what to do now. The CMOS won’t help either; I’m trying to figure out a solution right now. If you have any ideas, it would be great 🙏

E
entech
Member
210
04-07-2017, 08:15 AM
#16
Remove GPU attempt to try on board Video outs.
Are you in a salty place, smoke or vape? You don't need to reply. I was just considering your trick with the contact cleaner might apply to the PCI-E slot too. Your gaming room appears tidy and well-organized.
E
entech
04-07-2017, 08:15 AM #16

Remove GPU attempt to try on board Video outs.
Are you in a salty place, smoke or vape? You don't need to reply. I was just considering your trick with the contact cleaner might apply to the PCI-E slot too. Your gaming room appears tidy and well-organized.

N
Nickwheels1
Junior Member
23
04-12-2017, 03:17 PM
#17
I attempted to remove the GPU and used motherboard video outputs without success, my partner smokes and I do smoke, and we’re in the middle of Ireland so there’s no salt here 😂 I might try the contact cleaner on the PCIE now, but it needs to dry before use. Thank you, looks nicer at night with all the LEDs 👌
N
Nickwheels1
04-12-2017, 03:17 PM #17

I attempted to remove the GPU and used motherboard video outputs without success, my partner smokes and I do smoke, and we’re in the middle of Ireland so there’s no salt here 😂 I might try the contact cleaner on the PCIE now, but it needs to dry before use. Thank you, looks nicer at night with all the LEDs 👌

C
creuse02
Member
172
04-14-2017, 03:33 AM
#18
you wouldn't believe it man!! i'm not even joking right now, i'm going to make a video about this and link it, but it worked! i used the spray and BAM!!!! the issue is all solved, booted with display straight away!
C
creuse02
04-14-2017, 03:33 AM #18

you wouldn't believe it man!! i'm not even joking right now, i'm going to make a video about this and link it, but it worked! i used the spray and BAM!!!! the issue is all solved, booted with display straight away!

M
Menno1600
Member
142
04-24-2017, 04:59 AM
#19
😛
M
Menno1600
04-24-2017, 04:59 AM #19

😛

A
Alex_Salty
Junior Member
8
04-24-2017, 12:41 PM
#20
Watch the video for the proof.
A
Alex_Salty
04-24-2017, 12:41 PM #20

Watch the video for the proof.

Pages (2): Previous 1 2