F5F Stay Refreshed Hardware Desktop The computer fails to turn on.

The computer fails to turn on.

The computer fails to turn on.

Pages (2): 1 2 Next
S
SurvivalPro111
Junior Member
12
06-12-2020, 02:22 AM
#1
Earlier this morning I installed an additional GPU into my computer. At the time I didn’t realize it was still running. There’s a small spark near where the GPU connected, and now everything seems faulty. Nothing powers on, no electricity signals detected. I changed the motherboard but got nothing. I did notice a weak humming sound from the power supply unit, so I replaced that too. Still nothing. I’m really stuck, anyone have any suggestions? Parts list included: AMD Ryzen 5 4500, Enermax LIQmax III 120 RGB AIO, AMD Radeon 5700 XT, old motherboard ASUS ROG Strix B550-F Gaming Wi-Fi II, new motherboard ASRock X470 SLA/AC, former PSU EVGA SuperNova 550 G2, new PSU Corsair CX450M. The newer components I swapped in were likely the ones that failed, and they’ve been sitting unused for around six months if that helps.
S
SurvivalPro111
06-12-2020, 02:22 AM #1

Earlier this morning I installed an additional GPU into my computer. At the time I didn’t realize it was still running. There’s a small spark near where the GPU connected, and now everything seems faulty. Nothing powers on, no electricity signals detected. I changed the motherboard but got nothing. I did notice a weak humming sound from the power supply unit, so I replaced that too. Still nothing. I’m really stuck, anyone have any suggestions? Parts list included: AMD Ryzen 5 4500, Enermax LIQmax III 120 RGB AIO, AMD Radeon 5700 XT, old motherboard ASUS ROG Strix B550-F Gaming Wi-Fi II, new motherboard ASRock X470 SLA/AC, former PSU EVGA SuperNova 550 G2, new PSU Corsair CX450M. The newer components I swapped in were likely the ones that failed, and they’ve been sitting unused for around six months if that helps.

M
Miles_Archer
Junior Member
4
06-12-2020, 02:48 AM
#2
You've swapped the motherboard and power supply without any improvement, which suggests the PSU and board might still be intact or something else was damaged too. The next step should focus on testing a different CPU and GPU on the new board.
M
Miles_Archer
06-12-2020, 02:48 AM #2

You've swapped the motherboard and power supply without any improvement, which suggests the PSU and board might still be intact or something else was damaged too. The next step should focus on testing a different CPU and GPU on the new board.

S
Savage_Pig
Member
102
06-19-2020, 07:15 PM
#3
The issue isn't likely linked to the GPU. I can see you noticed no video output, which suggests another factor might be at play.
S
Savage_Pig
06-19-2020, 07:15 PM #3

The issue isn't likely linked to the GPU. I can see you noticed no video output, which suggests another factor might be at play.

D
dead_style
Junior Member
4
06-20-2020, 11:03 PM
#4
We understand you already have a second GPU, which means we can safely rule it out as the issue.
D
dead_style
06-20-2020, 11:03 PM #4

We understand you already have a second GPU, which means we can safely rule it out as the issue.

T
tifo007
Junior Member
5
06-21-2020, 06:28 AM
#5
ok.
T
tifo007
06-21-2020, 06:28 AM #5

ok.

T
themoonbear1
Junior Member
3
06-21-2020, 08:27 AM
#6
Yes, both versions are modular. You swapped all the modular cables during the replacement.
T
themoonbear1
06-21-2020, 08:27 AM #6

Yes, both versions are modular. You swapped all the modular cables during the replacement.

K
Klaus
Member
58
06-23-2020, 04:50 AM
#7
It's strange what just occurred. The beeping sound has come back. I thought it would be fixed, but it seems to have stopped working. I noticed some clues suggesting it might be damaged, even though it was a bit damp. Not what I anticipated.
K
Klaus
06-23-2020, 04:50 AM #7

It's strange what just occurred. The beeping sound has come back. I thought it would be fixed, but it seems to have stopped working. I noticed some clues suggesting it might be damaged, even though it was a bit damp. Not what I anticipated.

S
102
06-23-2020, 04:36 PM
#8
Absolutely, I understood.
S
SamanthaCellio
06-23-2020, 04:36 PM #8

Absolutely, I understood.

T
Toddikins
Junior Member
3
06-23-2020, 05:26 PM
#9
It seems the beeping sound has returned, and it wasn’t mentioned earlier. The term "slightly wet" might refer to a specific component or area, but more details would help clarify.
T
Toddikins
06-23-2020, 05:26 PM #9

It seems the beeping sound has returned, and it wasn’t mentioned earlier. The term "slightly wet" might refer to a specific component or area, but more details would help clarify.

C
Carleh
Junior Member
16
06-23-2020, 07:06 PM
#10
There was a humming or beeping noise coming from the power supply unit before I replaced it. The replacement model also made that sound. Additionally, there was some ink from a printer on it in different areas.
C
Carleh
06-23-2020, 07:06 PM #10

There was a humming or beeping noise coming from the power supply unit before I replaced it. The replacement model also made that sound. Additionally, there was some ink from a printer on it in different areas.

Pages (2): 1 2 Next