The computer fails to power on and emits a clicking sound.
The computer fails to power on and emits a clicking sound.
Thank you for your reply.
The lights on the CPU fan turn on briefly when I press the button, then the PSU clicks and everything shuts off without any display message or indication.
I've already checked the breaker and connected the PSU to the outlet, but it still doesn't work.
I plan to try a jumpstart tomorrow, though I'm very unlikely to succeed.
Verify that all connections are correctly inserted onto the motherboard, including SATA, power, and fan cables, ensuring none are misaligned or improperly seated. Check the EPS/CPU 4+4 pin connector at the top of the board above the CPU socket for correct orientation, as it can sometimes be inserted incorrectly. Confirm that the tabs enabling the two 4+4 connectors to merge face to face or were never separated, preventing misalignment. Also, ensure you haven’t accidentally inserted a PCIe 6+2 connector into the EPS/CPU power 4+4 sockets.
Make sure the 24-pin ATX connector is fully engaged and locked in place with the retention tab. Recheck every item on this list to confirm it’s securely seated; even slight misalignment can cause issues.
I have removed any non essential thing (RAM, GPU, Hard drives) and tried to jump start the thing but it's still the same result it
start for a sec, all lights turn on and then shut of after a split second. I'm scared that I have somehow not plug my cables at the right place (here is a picture of my PSU with the cables plugged in)
Alright I fixed the problem, the guy in the tutorial I was following didn't show a part of the installation. Now it doesn't stop just after starting however the clicking noise is back and the computer doesn't turn on, lights are on, ticking noise but doesn't start...
The clicking originates from the motherboard; it keeps switching on and off repeatedly, and I really don’t want you to say I need to purchase another one.
Hey everyone, for the record I just installed a new PSU because I had the same issue a few weeks prior and I thought it was because of my outdated PSU but apparently the problem just comes from the motherboard, as the title says when powered everything turns on (lights, fans, etc..) but my motherboard light's flicker indicating that it's just repeatedly turning on and off while making an awful clicking sound. Am I bound to buy a new one or is it something I can fix ?
Specs:
- CPU: Ryzen 5 5600x
- GPU: RTX 2060
- Motherboard : Gygabyte B450M DS3H
- RAM: 2 x 8Go T-FORCE DDR4
- Storage: 2 Seagate Barracuda (1To) & Kingston SSD (250Go)
- PSU: MSI MPG A750 GF
Initially try to locate the exact origin of the "clicking sound". Use a large cardboard tube or a rolled-up sheet of paper to gently inspect inside the case for the sound's source. Ask someone to assist if needed to restart the PC while you listen. Identifying where the clicks come from is the main goal.
The plug near the one you've connected to the upper socket labeled motherboard should also fit into the lower socket, which is also marked motherboard. Both of these connections need to be made into the two sockets on the PSU—one with a 16-pin and the other with a 10-pin. The plug that isn't shown in your picture should go into the spot I've highlighted in red below. Once you use it, it should work properly.
Yeah I did that yesterday now the computer starts but the motherboard keeps turning on and off while I try to boot it, making a clicking sound.