F5F Stay Refreshed Hardware Desktop The bios section isn't displaying.

The bios section isn't displaying.

The bios section isn't displaying.

T
Tautgroundhog7
Member
62
08-24-2021, 07:40 PM
#1
I'm trying to assemble a new PC and the BIOS isn't appearing. It's showing an error message AB, indicating a SETUP Input wait. I'm unsure if a BIOS is installed or not because I have a USB stick with the BIOS and drivers. Even after resetting the CMOS or flashing the BIOS, nothing happens. My specs are: CPU Intel 10900k, motherboard MSI z590 gaming carbon, RAM Corsair Dominator 32GB at 3600Mhz, GPU MSI RX 3070 Ti gaming x trio, cooling Aorus WaterForce 360, case Bequiet Dark Base 700. After completion it should display ERROR CODE b4, which suggests a USB hot plug issue.
T
Tautgroundhog7
08-24-2021, 07:40 PM #1

I'm trying to assemble a new PC and the BIOS isn't appearing. It's showing an error message AB, indicating a SETUP Input wait. I'm unsure if a BIOS is installed or not because I have a USB stick with the BIOS and drivers. Even after resetting the CMOS or flashing the BIOS, nothing happens. My specs are: CPU Intel 10900k, motherboard MSI z590 gaming carbon, RAM Corsair Dominator 32GB at 3600Mhz, GPU MSI RX 3070 Ti gaming x trio, cooling Aorus WaterForce 360, case Bequiet Dark Base 700. After completion it should display ERROR CODE b4, which suggests a USB hot plug issue.

T
th5c
Junior Member
49
08-25-2021, 04:07 AM
#2
Some mainboards fail to recognize the keyboard, which usually occurs with certain servers.
T
th5c
08-25-2021, 04:07 AM #2

Some mainboards fail to recognize the keyboard, which usually occurs with certain servers.

M
maxo1973
Member
149
08-25-2021, 07:30 PM
#3
The issue also occurs when no USB is connected, and the problem only changes when a USB drive is inserted. It displays error codes 27 or 24, indicating OEM pre-memory initialization codes. I'm really worried about this right now.
M
maxo1973
08-25-2021, 07:30 PM #3

The issue also occurs when no USB is connected, and the problem only changes when a USB drive is inserted. It displays error codes 27 or 24, indicating OEM pre-memory initialization codes. I'm really worried about this right now.

D
Dumzzy
Member
54
08-28-2021, 12:13 PM
#4
This setup also works with my EVGA X299 FTW.
D
Dumzzy
08-28-2021, 12:13 PM #4

This setup also works with my EVGA X299 FTW.

D
D_dae
Member
56
08-30-2021, 10:54 PM
#5
Could the speed be too high because of the 3600 MHz? It seems the motherboard controls might only reduce performance, not increase it. I might think the RAM is actually slower than expected.
D
D_dae
08-30-2021, 10:54 PM #5

Could the speed be too high because of the 3600 MHz? It seems the motherboard controls might only reduce performance, not increase it. I might think the RAM is actually slower than expected.

M
Mentox01
Junior Member
1
09-02-2021, 03:36 PM
#6
That doesn't seem to fit the setup. If it wasn't set up in the BIOS, it should normally operate at 2133 MHz by default. The 3600 MHz rating is only the maximum performance it can achieve.
M
Mentox01
09-02-2021, 03:36 PM #6

That doesn't seem to fit the setup. If it wasn't set up in the BIOS, it should normally operate at 2133 MHz by default. The 3600 MHz rating is only the maximum performance it can achieve.

F
foxh0pper
Member
229
09-02-2021, 05:05 PM
#7
Thanks for the assistance, but it seems my BIOS was quite old and didn’t recognize the 3070ti. I replaced the GPU, entered the BIOS, and now I’m setting up Windows while trying to install the NVIDIA drivers.
F
foxh0pper
09-02-2021, 05:05 PM #7

Thanks for the assistance, but it seems my BIOS was quite old and didn’t recognize the 3070ti. I replaced the GPU, entered the BIOS, and now I’m setting up Windows while trying to install the NVIDIA drivers.

W
Wastingman
Member
164
09-10-2021, 05:25 AM
#8
It seems odd, but maybe a new update will resolve the issue...
W
Wastingman
09-10-2021, 05:25 AM #8

It seems odd, but maybe a new update will resolve the issue...

S
Sanzukay
Junior Member
14
09-10-2021, 06:21 AM
#9
It seems the new BIOS didn't improve anything, right? You're wondering what else you could try.
S
Sanzukay
09-10-2021, 06:21 AM #9

It seems the new BIOS didn't improve anything, right? You're wondering what else you could try.