F5F Stay Refreshed Hardware Desktop The BIOS continues to restart repeatedly over the past week.

The BIOS continues to restart repeatedly over the past week.

The BIOS continues to restart repeatedly over the past week.

R
Relo_273
Member
169
04-29-2020, 01:34 PM
#1
Good evening, my setup uses an ASUS ROG Strix Z490-E paired with an i7 10700k. The issue is that the BIOS frequently resets back to default settings. Over the past two years I maintained the same overclocking configuration without any major changes. Recently, after changing one setting last week, the system booted into an F1 and F3 menu. Days later I suspected a CMOS battery problem because the date and time kept resetting. After replacing the CMOS, I reset the BIOS to default and enabled XMP 1—then it shut down completely. Now whenever I power it on for the first time of the day, it restarts again. It seems to happen when the system powers off overnight and then comes back on after a few hours without being used. The latest BIOS update from Intel appears to be applied.
R
Relo_273
04-29-2020, 01:34 PM #1

Good evening, my setup uses an ASUS ROG Strix Z490-E paired with an i7 10700k. The issue is that the BIOS frequently resets back to default settings. Over the past two years I maintained the same overclocking configuration without any major changes. Recently, after changing one setting last week, the system booted into an F1 and F3 menu. Days later I suspected a CMOS battery problem because the date and time kept resetting. After replacing the CMOS, I reset the BIOS to default and enabled XMP 1—then it shut down completely. Now whenever I power it on for the first time of the day, it restarts again. It seems to happen when the system powers off overnight and then comes back on after a few hours without being used. The latest BIOS update from Intel appears to be applied.

M
marwood773
Junior Member
18
04-30-2020, 03:32 PM
#2
Verify if the battery is genuinely 3V using a multimeter. If not, it likely indicates a hardware issue.
M
marwood773
04-30-2020, 03:32 PM #2

Verify if the battery is genuinely 3V using a multimeter. If not, it likely indicates a hardware issue.

G
GigiCakes
Senior Member
261
04-30-2020, 04:25 PM
#3
It didn’t fail right away after turning it off. After about half an hour, it restarted and ran smoothly without any errors. That means the battery is functioning properly.
G
GigiCakes
04-30-2020, 04:25 PM #3

It didn’t fail right away after turning it off. After about half an hour, it restarted and ran smoothly without any errors. That means the battery is functioning properly.

T
TTGscopes
Junior Member
37
05-02-2020, 11:35 AM
#4
Tested the old CMOS with a multimeter and got a reading of 0.50 or close to that.
T
TTGscopes
05-02-2020, 11:35 AM #4

Tested the old CMOS with a multimeter and got a reading of 0.50 or close to that.

S
SoyDash
Posting Freak
859
05-04-2020, 10:53 AM
#5
The battery is out of power, likely below the expected 3 volts. Swapping in a CR2032 should fix it, as they’re inexpensive.
S
SoyDash
05-04-2020, 10:53 AM #5

The battery is out of power, likely below the expected 3 volts. Swapping in a CR2032 should fix it, as they’re inexpensive.

L
lolleskicraft
Member
54
05-04-2020, 12:52 PM
#6
I just took out the new CMOS and it now has a sticky label with child-proof text. After removing the sticker, the reading is 3..29v. It looks like the sticky on the battery might have been the issue. I’ll keep an eye on it for a day or so to see if it works.
L
lolleskicraft
05-04-2020, 12:52 PM #6

I just took out the new CMOS and it now has a sticky label with child-proof text. After removing the sticker, the reading is 3..29v. It looks like the sticky on the battery might have been the issue. I’ll keep an eye on it for a day or so to see if it works.

I
ItsAge
Member
229
05-18-2020, 01:36 PM
#7
They found it out by child protection. It’s actually amusing.
I
ItsAge
05-18-2020, 01:36 PM #7

They found it out by child protection. It’s actually amusing.