Temperature problem. Please help
Temperature problem. Please help
Did you attempt reapplying? If not, the package temperature seems excessively high, suggesting the adhesive has lost effectiveness or may have been of poor quality. Check your case and inspect the tubes. Run a brief stress test to see if they withstand heat buildup—if the tubes warm up, the paste might be acceptable, though this wouldn’t fully resolve the issue with the extreme heat.
I've already shared it using Mastergel Cooler Master. The tubes remain cool thanks to the case design (Masterbox H500p). Stress test at the junction confirmed this!
The tubes need to become warm or hot; otherwise, the AIO won't work correctly. You should notice a minor shake in the tubes. If not, the pump isn't operating.
Either the AIO is not doing what's needed or you have a dodgy sensor on your board.