F5F Stay Refreshed Hardware Desktop System stops operating when temperature reaches 70°C

System stops operating when temperature reaches 70°C

System stops operating when temperature reaches 70°C

Pages (2): 1 2 Next
J
jynini
Member
62
07-08-2022, 11:34 AM
#1
Hey! I've dealt with a similar issue before. I swapped my CPU from a Ryzen 1600A to a Ryzen 5600 but it didn't change anything. My computer still shuts down when the temperature hits around 70°C, and now I can't even open Windows because it just powers off. MOBO: Asus Prime B450M-A RAM: Goodram 2x8GB 2666MHz GPU: RTX3060 PSU: Seasonic 850+ Gold I also looked into the voltages—it looks like the expensive PSU might be the issue. (I got it a month ago) 12V rail: 11.98V, 5V rail: 4.95V, 3.3V rail: 3.3V
J
jynini
07-08-2022, 11:34 AM #1

Hey! I've dealt with a similar issue before. I swapped my CPU from a Ryzen 1600A to a Ryzen 5600 but it didn't change anything. My computer still shuts down when the temperature hits around 70°C, and now I can't even open Windows because it just powers off. MOBO: Asus Prime B450M-A RAM: Goodram 2x8GB 2666MHz GPU: RTX3060 PSU: Seasonic 850+ Gold I also looked into the voltages—it looks like the expensive PSU might be the issue. (I got it a month ago) 12V rail: 11.98V, 5V rail: 4.95V, 3.3V rail: 3.3V

H
hrgriff
Senior Member
573
07-10-2022, 10:35 AM
#2
What cooler are you using? Did you apply thermal paste and tighten everything properly? Did you take off the plastic sticker? I’m thinking it probably reaches around 70°C, but it climbs very quickly and you don’t notice anything beyond that. That temperature is typical for a CPU, so it shouldn’t shut down, and the voltages look fine. Are you intentionally overclocking?
H
hrgriff
07-10-2022, 10:35 AM #2

What cooler are you using? Did you apply thermal paste and tighten everything properly? Did you take off the plastic sticker? I’m thinking it probably reaches around 70°C, but it climbs very quickly and you don’t notice anything beyond that. That temperature is typical for a CPU, so it shouldn’t shut down, and the voltages look fine. Are you intentionally overclocking?

D
Deepsquirrel
Junior Member
7
07-17-2022, 09:49 PM
#3
The name sounds similar to "bad RAM," but it doesn’t clarify why the system shuts down even when it isn’t overheating. Have you upgraded your BIOS to the newest version and then reset the CMOS?
D
Deepsquirrel
07-17-2022, 09:49 PM #3

The name sounds similar to "bad RAM," but it doesn’t clarify why the system shuts down even when it isn’t overheating. Have you upgraded your BIOS to the newest version and then reset the CMOS?

S
SniperGirlPro
Junior Member
14
07-23-2022, 05:35 PM
#4
Unfortunately I have the stock cooler, I applied thermal paste, everything is fine.
S
SniperGirlPro
07-23-2022, 05:35 PM #4

Unfortunately I have the stock cooler, I applied thermal paste, everything is fine.

D
DrFranknstaine
Junior Member
1
08-11-2022, 09:39 PM
#5
No, I didn't remove the sticker from the wraith spire.
D
DrFranknstaine
08-11-2022, 09:39 PM #5

No, I didn't remove the sticker from the wraith spire.

M
M4sh
Member
148
08-14-2022, 12:25 PM
#6
I've received the newest BIOS update, reset the CMOS, but RAM sticks aren't working properly. I'm considering replacing my current setup with a new MOBO. The previous owner had issues with shutdowns, so it might be worth exploring that option.
M
M4sh
08-14-2022, 12:25 PM #6

I've received the newest BIOS update, reset the CMOS, but RAM sticks aren't working properly. I'm considering replacing my current setup with a new MOBO. The previous owner had issues with shutdowns, so it might be worth exploring that option.

P
PinneyGelvin
Member
52
08-14-2022, 08:47 PM
#7
Yes i did.
P
PinneyGelvin
08-14-2022, 08:47 PM #7

Yes i did.

L
226
08-15-2022, 05:39 AM
#8
You have e-waste...
L
LuLuPlaysCraft
08-15-2022, 05:39 AM #8

You have e-waste...

P
Pickmaster12
Senior Member
710
09-01-2022, 01:55 AM
#9
This board is quite subpar, but swapping it wouldn’t cause any harm.
P
Pickmaster12
09-01-2022, 01:55 AM #9

This board is quite subpar, but swapping it wouldn’t cause any harm.

N
NakeBemveu
Member
96
09-13-2022, 02:16 AM
#10
You're considering the A520M DS3H, that's a classic model. Let me check if it's something you should be confident about.
N
NakeBemveu
09-13-2022, 02:16 AM #10

You're considering the A520M DS3H, that's a classic model. Let me check if it's something you should be confident about.

Pages (2): 1 2 Next