F5F Stay Refreshed Hardware Desktop Struggling to update BIOS using the Flash Bios button with MSI MPG B550 Gaming Plus

Struggling to update BIOS using the Flash Bios button with MSI MPG B550 Gaming Plus

Struggling to update BIOS using the Flash Bios button with MSI MPG B550 Gaming Plus

Pages (3): 1 2 3 Next
A
AA_Esser
Member
181
04-21-2020, 02:23 PM
#1
Hello, I changed the motherboard and CPU from Gigabyte A320M-S2H to an MSI B550 Gaming Plus and swapped my Ryzen 5 2600X for a Ryzen 7 5700X3D. I'm attempting to flash the BIOS with a newer version since the current one doesn't support my CPU. I'm trying version 7C56v1H right now but also tried 7C56v1F, which is the first that supports Series 5000. The guides suggest formatting the USB to FAT32 MBR and renaming the BIOS file to MSI.ROM inside it, then inserting the USB into the BIOS slot and pressing the Flash button. It should take about five minutes, which I recorded as 5:48, and then the PC should power off automatically. However, mine doesn't shut down on its own. I'm not getting any output when I restart.
A
AA_Esser
04-21-2020, 02:23 PM #1

Hello, I changed the motherboard and CPU from Gigabyte A320M-S2H to an MSI B550 Gaming Plus and swapped my Ryzen 5 2600X for a Ryzen 7 5700X3D. I'm attempting to flash the BIOS with a newer version since the current one doesn't support my CPU. I'm trying version 7C56v1H right now but also tried 7C56v1F, which is the first that supports Series 5000. The guides suggest formatting the USB to FAT32 MBR and renaming the BIOS file to MSI.ROM inside it, then inserting the USB into the BIOS slot and pressing the Flash button. It should take about five minutes, which I recorded as 5:48, and then the PC should power off automatically. However, mine doesn't shut down on its own. I'm not getting any output when I restart.

R
Roar_All_Day
Junior Member
8
05-07-2020, 08:40 PM
#2
Insert the USB into the designated port and watch the lights indicate the status.
R
Roar_All_Day
05-07-2020, 08:40 PM #2

Insert the USB into the designated port and watch the lights indicate the status.

B
Bonnibel
Posting Freak
794
05-13-2020, 03:42 AM
#3
Yes, the USB drive uses FAT32 format.
B
Bonnibel
05-13-2020, 03:42 AM #3

Yes, the USB drive uses FAT32 format.

T
TheGr8Villager
Junior Member
41
05-14-2020, 07:54 AM
#4
The USB is located in the port labeled BIOS, and the red light indicates it's working. I prepared the USB using GParted with FAT32 MBR.
T
TheGr8Villager
05-14-2020, 07:54 AM #4

The USB is located in the port labeled BIOS, and the red light indicates it's working. I prepared the USB using GParted with FAT32 MBR.

1
10Justin
Member
105
05-20-2020, 09:04 PM
#5
The video I recorded is the one he showed me, and I own the same USB drive he does.
1
10Justin
05-20-2020, 09:04 PM #5

The video I recorded is the one he showed me, and I own the same USB drive he does.

S
SkyNanners
Junior Member
17
05-22-2020, 06:41 PM
#6
I'm unfamiliar with FAT32 MBR. I've only used FAT32 before, and it functioned properly.
S
SkyNanners
05-22-2020, 06:41 PM #6

I'm unfamiliar with FAT32 MBR. I've only used FAT32 before, and it functioned properly.

M
230
05-23-2020, 02:48 AM
#7
Sorry, I'm unclear. It's formatted for FAT32 with a MBR partition layout.
M
MaddieStarr801
05-23-2020, 02:48 AM #7

Sorry, I'm unclear. It's formatted for FAT32 with a MBR partition layout.

T
thatseb
Member
50
05-23-2020, 03:23 AM
#8
Is the LED lighting up? Are your 24-pin and 8-pin CPU fully powered in? Is the power supply active?
T
thatseb
05-23-2020, 03:23 AM #8

Is the LED lighting up? Are your 24-pin and 8-pin CPU fully powered in? Is the power supply active?

T
Thunderbolt83
Junior Member
4
05-23-2020, 05:14 AM
#9
The LED flashes for five minutes, the 24-pin connector is attached. Power reaches the motherboard, causing the RGB board lights and case lights to illuminate. However, the system fails to start.
T
Thunderbolt83
05-23-2020, 05:14 AM #9

The LED flashes for five minutes, the 24-pin connector is attached. Power reaches the motherboard, causing the RGB board lights and case lights to illuminate. However, the system fails to start.

A
AwSoMe683
Member
50
05-23-2020, 05:38 AM
#10
It seems like the flash is working, but the MOBO isn't sending a post without using the CPU.
A
AwSoMe683
05-23-2020, 05:38 AM #10

It seems like the flash is working, but the MOBO isn't sending a post without using the CPU.

Pages (3): 1 2 3 Next