F5F Stay Refreshed Hardware Desktop Simple RAM choices available

Simple RAM choices available

Simple RAM choices available

Pages (3): 1 2 3 Next
W
Warigan
Junior Member
49
06-13-2019, 07:27 PM
#1
Hey there! Could you let me know about some RAM that’s 3200 MHz and CL15? You want something simple, not too bulky. I’m considering a 3950x build with four 8 GB sticks and a Noctua NH D-15, which usually covers everything. You mentioned needing standard-height dimmers so the fan mount stays at its current level during installation. Thanks ahead!
W
Warigan
06-13-2019, 07:27 PM #1

Hey there! Could you let me know about some RAM that’s 3200 MHz and CL15? You want something simple, not too bulky. I’m considering a 3950x build with four 8 GB sticks and a Noctua NH D-15, which usually covers everything. You mentioned needing standard-height dimmers so the fan mount stays at its current level during installation. Thanks ahead!

S
SuperTurtle998
Junior Member
28
06-13-2019, 07:47 PM
#2
Find affordable RAM options with minimal visible design.
S
SuperTurtle998
06-13-2019, 07:47 PM #2

Find affordable RAM options with minimal visible design.

D
dylosama
Member
150
06-23-2019, 05:34 PM
#3
The case you're employing influences the available clearance, which in turn affects the maximum height of the RAM.
D
dylosama
06-23-2019, 05:34 PM #3

The case you're employing influences the available clearance, which in turn affects the maximum height of the RAM.

I
ianpowergamer
Junior Member
9
06-26-2019, 07:51 PM
#4
3200 CL15 will significantly increase costs relative to CL16 in PCPP, so choose sticks without a heat spreader in the filter.
I
ianpowergamer
06-26-2019, 07:51 PM #4

3200 CL15 will significantly increase costs relative to CL16 in PCPP, so choose sticks without a heat spreader in the filter.

B
BernyTheMan
Member
180
06-26-2019, 09:23 PM
#5
The Vengeance LPX measures around 31mm, making it suitable for that part. Alternatively, the essential RAM module without heat spreaders could work too.
B
BernyTheMan
06-26-2019, 09:23 PM #5

The Vengeance LPX measures around 31mm, making it suitable for that part. Alternatively, the essential RAM module without heat spreaders could work too.

T
TheFallenRose
Senior Member
616
06-28-2019, 05:43 PM
#6
I believed temperature was the key factor?
T
TheFallenRose
06-28-2019, 05:43 PM #6

I believed temperature was the key factor?

L
LDT8
Junior Member
37
06-30-2019, 06:07 PM
#7
They own an NH-D15 vehicle.
L
LDT8
06-30-2019, 06:07 PM #7

They own an NH-D15 vehicle.

R
randomdude9o9
Junior Member
33
06-30-2019, 07:57 PM
#8
Debate difficult against Corsair Vengeance LPX
R
randomdude9o9
06-30-2019, 07:57 PM #8

Debate difficult against Corsair Vengeance LPX

I
InoueAlice
Senior Member
677
07-01-2019, 02:03 AM
#9
This feature allows you to increase the fan speed significantly when needed.
I
InoueAlice
07-01-2019, 02:03 AM #9

This feature allows you to increase the fan speed significantly when needed.

A
anakindaur
Senior Member
576
07-01-2019, 06:02 AM
#10
Redragon Ironhide is dealing with a tight situation where the Noctua nearly touches the side glass panel. Despite that, I successfully placed the owl sticker on one of the fans. Just to note, I’m okay with both the fans being the same height and the case restricting my setup. Also, it might make things worse if the radiator area isn’t fully illuminated by the fan light.
A
anakindaur
07-01-2019, 06:02 AM #10

Redragon Ironhide is dealing with a tight situation where the Noctua nearly touches the side glass panel. Despite that, I successfully placed the owl sticker on one of the fans. Just to note, I’m okay with both the fans being the same height and the case restricting my setup. Also, it might make things worse if the radiator area isn’t fully illuminated by the fan light.

Pages (3): 1 2 3 Next