Simple RAM choices available
Simple RAM choices available
there are some very discreet 2666mhz ADATA units available on sites like aliexpress, without heat spreaders, with purple PCB finish and close-up shots of the serial number. However, I’d agree with most people that Corsair Vengence LPX remains the top choice, as it’s well-suited for ITX builds and pairs nicely with coolers such as the D15, delivering solid speed and low latency at a fair price. Running a 3950x at 2666mhz would be quite risky.
The site notes a 165mm clearance for the cooler, enabling the front fan to stay in its default setting with room for a 32mm RAM stick beneath it. Corsair LPX or typical-height RAM should suffice. Where are you purchasing from? What is your budget? Are you seeking 8GB modules specifically? This amount of capacity per stick might seem limited compared to the availability of 16GB options. Increasing the fan height offers minimal cooling improvement, while the middle fan handles most of the workload.
So up to 32mm it works. The RAM doesn’t have to be slim, but high-end options over 3000 MHz tend to be tall and complex. I’d like side radiators included. The budget isn’t a big factor since this isn’t an urgent upgrade; I can save for it (currently 7700k with 32GB at 2133 MHz) and pay in installments if needed. You’re asking about why 8 GB sticks? Because you’re considering four 32MB sticks instead of two 16GB ones.
The cooling fins are mostly decorative and rarely needed. Where you're buying from can make a big difference—there are typically several choices with basic cooling options. Generally, fewer components mean less hassle. Four units can boost performance on systems supporting quad channels, though this isn't true for the 3950x. Two 16GB units would provide more flexibility for future upgrades.
I'm based in Poland. Let me explain further. Quad-channel is typically found on HEDT platforms, but other systems can also support it. The difference between 4x and 2x speeds isn't just about being faster—it's about efficiency. Using even numbers of dimms generally works better than odd ones, which helps maintain performance.
This cooler offers excellent RAM space, with cutouts on both sides of the heatsink. I’ve used large Corsair Vengeance and HyperX DDR3 modules without any issues. With just one fan, it manages to handle around 200-230W under load. For the R9-3950X model, you might want to watch out for uneven heat spreaders, which can cause poor contact between the cooler and the heatsink.
Additional components often lead to more issues, while higher memory density allows for more RAM without swapping in existing storage. Performance gains are minimal beyond that point. For better results, consider a Ballistix Sport LT kit, especially if you intend to upgrade the RAM: https://www.ceneo.pl/85376413
OC refers to the advertised maximum speed of your system, typically around 3200MHz. It indicates the peak performance you can achieve with your components. Exceeding 2133MHz often needs an XMP profile, but whether this counts as overclocking depends on your specific hardware.