F5F Stay Refreshed Hardware Desktop Significant quantity of static charge accumulates inside PCs

Significant quantity of static charge accumulates inside PCs

Significant quantity of static charge accumulates inside PCs

M
mumien350
Member
Find
82
02-21-2021, 10:24 AM
#1
Hey everyone! Recently, the power supply unit of my old computer from a salvaged build failed (smoke everywhere). Fortunately, it looks like most of my parts stayed intact. Here are the details of my PC setup: - Intel i5 10400f with OEM fan
- Dell OEM RTX 3060 TI
- Corsair vengeance 16GB RAM at 2400Mhz
- Asrock H510M-HDV/M.2
- Kingston 480GB SSD plus an old Seagate 2TB HDD
- Old Talius 600W PSU broke down, replaced with GIGABYTE P650B (double-checked it’s safe)
- Standard Mars Gaming case

The only non-new component is the case itself. The rest I’ve gotten secondhand from local markets. Before the new PSU failed, I noticed a lot of static buildup around my PC, even after the replacement. It’s become so risky that I sometimes can’t even touch screws or the side panel without getting a shock. Even the metal parts of my sim racing steering wheel aren’t safe when plugged in. I’m hoping there’s a fix to avoid another PSU issue damaging my gear. Thanks for any advice!
Reply
Reply
M
mumien350
02-21-2021, 10:24 AM #1

Hey everyone! Recently, the power supply unit of my old computer from a salvaged build failed (smoke everywhere). Fortunately, it looks like most of my parts stayed intact. Here are the details of my PC setup: - Intel i5 10400f with OEM fan
- Dell OEM RTX 3060 TI
- Corsair vengeance 16GB RAM at 2400Mhz
- Asrock H510M-HDV/M.2
- Kingston 480GB SSD plus an old Seagate 2TB HDD
- Old Talius 600W PSU broke down, replaced with GIGABYTE P650B (double-checked it’s safe)
- Standard Mars Gaming case

The only non-new component is the case itself. The rest I’ve gotten secondhand from local markets. Before the new PSU failed, I noticed a lot of static buildup around my PC, even after the replacement. It’s become so risky that I sometimes can’t even touch screws or the side panel without getting a shock. Even the metal parts of my sim racing steering wheel aren’t safe when plugged in. I’m hoping there’s a fix to avoid another PSU issue damaging my gear. Thanks for any advice!

Reply
Reply
K
Kysanachikun52
Junior Member
Find
25
02-23-2021, 04:02 AM
#2
I use a power receptacle tester and verify that the ground is properly linked to the wall socket you’re employing (and possibly throughout your residence). This poses a serious risk if missing, potentially leading to a significant fire danger. If the issue exists, consider swapping the power cable since the ground wire might be disconnected. Alternatively, test for continuity with a multimeter if needed. Should everything check out, the source of shocks could stem from factors like dry air, carpets, or rubber-soled footwear.
Reply
Reply
K
Kysanachikun52
02-23-2021, 04:02 AM #2

I use a power receptacle tester and verify that the ground is properly linked to the wall socket you’re employing (and possibly throughout your residence). This poses a serious risk if missing, potentially leading to a significant fire danger. If the issue exists, consider swapping the power cable since the ground wire might be disconnected. Alternatively, test for continuity with a multimeter if needed. Should everything check out, the source of shocks could stem from factors like dry air, carpets, or rubber-soled footwear.

Reply
Reply
T
The_Trap
Member
Find
223
02-23-2021, 11:07 AM
#3
Great! You can try using your multimeter, but you'll need to get familiar with its functions.
Reply
Reply
T
The_Trap
02-23-2021, 11:07 AM #3

Great! You can try using your multimeter, but you'll need to get familiar with its functions.

Reply
Reply
E
EPIC_GT
Member
Find
219
02-23-2021, 03:56 PM
#4
Usually this indicates the device isn't properly mounted. For a low-cost model, it's not unexpected. Consider investing a bit more to get a reliable brand. Fractal Design and Phanteks offer excellent choices at affordable prices.
Reply
Reply
E
EPIC_GT
02-23-2021, 03:56 PM #4

Usually this indicates the device isn't properly mounted. For a low-cost model, it's not unexpected. Consider investing a bit more to get a reliable brand. Fractal Design and Phanteks offer excellent choices at affordable prices.

Reply
Reply
W
WastedSpace
Member
Find
156
02-23-2021, 05:15 PM
#5
Sure, I’ll remember that when you have more funds available. Do you think there’s anything you can do to fix the situation right now?
Reply
Reply
W
WastedSpace
02-23-2021, 05:15 PM #5

Sure, I’ll remember that when you have more funds available. Do you think there’s anything you can do to fix the situation right now?

Reply
Reply
B
BlooHD
Member
Find
62
02-23-2021, 07:57 PM
#6
Ensure continuity is active, place one pin in the center hole and the other on the rounded ground plug. If it beeps, it works. If not, try setting it to the lowest resistance mode and repeat. The display should show a value near 0 (possibly fluctuating) rather than just a fixed "1" or "over," as wires aren't perfect conductors.
Reply
Reply
B
BlooHD
02-23-2021, 07:57 PM #6

Ensure continuity is active, place one pin in the center hole and the other on the rounded ground plug. If it beeps, it works. If not, try setting it to the lowest resistance mode and repeat. The display should show a value near 0 (possibly fluctuating) rather than just a fixed "1" or "over," as wires aren't perfect conductors.

Reply
Reply