Setting up an additional router assistance.
Setting up an additional router assistance.
You can set up a second router on the second floor without using coaxial cable. Consider alternatives like Verizon’s option, though it might be costly. Your WiFi extender is limited to about 20 Mbps, so you may need to improve its placement or consider a wired solution for better performance. Let me know if you'd like more tips!
Connecting the two routers via an Ethernet cable allows you to disable the DHCP server on the second router and convert it into an access point.
Yes, that implies it would function solely with devices linked via LAN cable.
You have the option to configure the Wi-Fi on the second router.
Connecting Router 1 to Router 2 via coaxial cable isn't standard. It might work in rare cases, but it's not recommended.
Not at all, the issue might be related to the coaxial cable in your room.
You might want to test it out. If successful, maintain the default DHCP settings on the second router. Your home will have two distinct networks. Equipment linked to router 1 won’t be able to reach those on router 2. Adjust if needed. I question whether your ISP will provide two active coax connections unless you’ve paid for it. However, if you have a second modem or router set up, it’s worth trying.
Verizon operates as a fiber service provider and typically uses a Moca router. They convert fiber connections into coaxial lines to deliver television services. Moca also handles cable services on the same infrastructure, but internet traffic runs on their specific frequencies, necessitating Moca equipment. They offer adapters that switch from coax to Ethernet. The challenge lies in compatibility with Verizon’s gear. If you understand your home’s coax layout—such as whether all lines converge in one area—you can better plan the setup. Ideally, isolate the line leading to your room and connect it to a Moca adapter, while routing another coax line to the router. You may need to extend the coax to reach the router, but this process isn’t straightforward. Generally, a non-bonded Moca 2.0 adapter supports up to 400Mbps half duplex, whereas bonded models can reach 800Mbps half duplex.