Ryzen 9 shows odd performance issues when paired with ProArt X670E-CREATOR and Wi-Fi.
Ryzen 9 shows odd performance issues when paired with ProArt X670E-CREATOR and Wi-Fi.
I immediately noticed this unusual pattern: the temperature graphs behave strangely, power graphs follow a similar trend, current graphs differ, but usage graphs seem normal. I’m puzzled by the power limit fluctuations—it feels like the system is intermittently pausing and forcing the CPU into idle mode, which is quite odd. This is the first time I’ve observed something like this on any platform. My only guesses are that the cooler might not be secured properly or that PBO is reacting unexpectedly to rising core temperatures. I plan to examine the log file for clues, but out of curiosity, could you run Cinebench in real-time priority mode? It might clarify whether Windows or another program is affecting performance. Avoid running HWInfo in the background; real-time priority should work better for accurate monitoring. If the score aligns more closely with expected values, it could point to a Windows or software interference disrupting Cinebench. Adjusting priority via Task Manager—click Cinebench, go to details, then priority settings—should help identify the cause.
Only one pass took 34,345 but then a 10-minute run caused the system to crash. It wasn't adjusting smoothly.
It seems you're experiencing instability mainly due to real-time priority settings and heavy Windows activity. The score is still acceptable, though it's on the lower side compared to what you'd expect. The issue likely stems from a Windows or BIOS conflict rather than a CPU problem. Generally, switching to real-time mode should only involve a small adjustment—usually 500 to 1000 points. If you have the 7950X model, avoid using it unless you're certain about your needs.
I rebooted and it seems to complete all the passes but freezes everything, even the mouse. After finishing, I think everything should come back and I’ll check the score. I only wanted to test a swap to determine if the CPU is the issue, so the RAM looks fine. I also got another set from the QVL list. Should I re-flash the BIOS and restore the previous version, not the latest one?
I got a BSOD at 24th pass sadly but I don't hear the throttling.
The system should restart in approximately ten minutes after completion. I usually run it with real-time priority for competitive overclocking, and I only let it run frequently when I have a POST code on my board that shows CPU temperatures, ensuring stability and preventing crashes or system hardlock. Still, I wouldn't suggest leaving it unattended for ten minutes, as Windows might not be pleased. My approach would be to reflash the current BIOS—starting with a clean CMOS reset, since skipping that has caused issues before—and if that fails, move to a slightly older BIOS version.
Excellent update, a fresh BIOS version was just installed yesterday. I reset the CMOS by removing the battery and flashed it, ensuring everything ran smoothly without any AI interference. After a Cinebench test, there were no fluctuations or unusual throttling—perfect performance across all cores with a score of 37942. I’m thrilled I didn’t need to replace the CPU or RAM, and I even ordered a new cooler for evaluation. Thank you all for your support; it really helped speed up the troubleshooting process.