F5F Stay Refreshed Hardware Desktop Ryzen 5 3600 compatible with Asus Strix X370 motherboard

Ryzen 5 3600 compatible with Asus Strix X370 motherboard

Ryzen 5 3600 compatible with Asus Strix X370 motherboard

Pages (3): Previous 1 2 3 Next
P
Puppypower48
Member
147
03-14-2019, 11:26 PM
#11
It would be useful to examine the voltage levels. A bigger air cooler would provide some benefit. Could you tell me what case you're using and how your fans are arranged?
P
Puppypower48
03-14-2019, 11:26 PM #11

It would be useful to examine the voltage levels. A bigger air cooler would provide some benefit. Could you tell me what case you're using and how your fans are arranged?

W
Wasabe
Junior Member
2
03-19-2019, 06:38 AM
#12
You're working with a cm590III setup featuring two intake ports of 120mm, two exhaust ports of 140mm (top port 140mm, bottom port 120mm), and a push/pull configuration using a 410p.
W
Wasabe
03-19-2019, 06:38 AM #12

You're working with a cm590III setup featuring two intake ports of 120mm, two exhaust ports of 140mm (top port 140mm, bottom port 120mm), and a push/pull configuration using a 410p.

G
goolst2003
Member
217
03-20-2019, 11:28 PM
#13
voltage limit reaches 1.369 volts
G
goolst2003
03-20-2019, 11:28 PM #13

voltage limit reaches 1.369 volts

T
The_Ismist
Junior Member
38
03-25-2019, 06:27 AM
#14
Good ventilation setup in mind. I’d consider replacing the 140mm exhaust fans with 120mm intake fans if feasible, and adjust the speed of the top fans to run at lower RPMs. This should improve airflow through the case. Useful to test before purchasing a new CPU cooler. It’s a bit high for a third-gen Ryzen, which likely explains the elevated temperatures—provided voltages aren’t sustained, the risk remains mainly from the higher heat output. For context, my R7 3800x rarely overheats despite similar conditions, thanks to a larger air cooler and lower voltages.
T
The_Ismist
03-25-2019, 06:27 AM #14

Good ventilation setup in mind. I’d consider replacing the 140mm exhaust fans with 120mm intake fans if feasible, and adjust the speed of the top fans to run at lower RPMs. This should improve airflow through the case. Useful to test before purchasing a new CPU cooler. It’s a bit high for a third-gen Ryzen, which likely explains the elevated temperatures—provided voltages aren’t sustained, the risk remains mainly from the higher heat output. For context, my R7 3800x rarely overheats despite similar conditions, thanks to a larger air cooler and lower voltages.

Z
zanephua
Member
51
04-01-2019, 04:09 AM
#15
Your system is set to auto-voltage, but it appears to be running low.
Z
zanephua
04-01-2019, 04:09 AM #15

Your system is set to auto-voltage, but it appears to be running low.

H
HeatherHannah
Member
194
04-01-2019, 05:43 AM
#16
your cpu operates at a voltage of 1.088 volts.
H
HeatherHannah
04-01-2019, 05:43 AM #16

your cpu operates at a voltage of 1.088 volts.

P
195
04-01-2019, 09:45 AM
#17
I can't exchange the 140mm part because the case only allows one 140mm intake, making 120mm the preferable option.
P
PARAN0ID_M3DIC
04-01-2019, 09:45 AM #17

I can't exchange the 140mm part because the case only allows one 140mm intake, making 120mm the preferable option.

O
Olewww123
Senior Member
255
04-10-2019, 11:46 PM
#18
Undervolted at 1.250V, but I don’t recall the VDD setting. I’d start experimenting with custom fan curves first. It seems the intake fans should handle most of the load, while the top exhaust shouldn’t spin too hard.
O
Olewww123
04-10-2019, 11:46 PM #18

Undervolted at 1.250V, but I don’t recall the VDD setting. I’d start experimenting with custom fan curves first. It seems the intake fans should handle most of the load, while the top exhaust shouldn’t spin too hard.

P
peter4everpan
Member
235
04-14-2019, 03:23 PM
#19
It's a new version of noctua, and I can adjust its shape accordingly.
P
peter4everpan
04-14-2019, 03:23 PM #19

It's a new version of noctua, and I can adjust its shape accordingly.

M
mans0203
Member
64
04-14-2019, 05:16 PM
#20
Ich habe den Spannungswert auf 1,0 Volt eingestellt.
M
mans0203
04-14-2019, 05:16 PM #20

Ich habe den Spannungswert auf 1,0 Volt eingestellt.

Pages (3): Previous 1 2 3 Next