F5F Stay Refreshed Hardware Desktop RTX 3080 frequent random shutdowns across most titles plus additional problems

RTX 3080 frequent random shutdowns across most titles plus additional problems

RTX 3080 frequent random shutdowns across most titles plus additional problems

Pages (3): Previous 1 2 3
M
mikagreat
Junior Member
35
11-09-2020, 01:14 PM
#21
Visit the TechPowerUp forums. Your friend ExiledAirman might assist if he's online and sees your message. You can also check out the Guru3D community. After spending about half an hour reviewing your card details, I haven't discovered anything unusual.
M
mikagreat
11-09-2020, 01:14 PM #21

Visit the TechPowerUp forums. Your friend ExiledAirman might assist if he's online and sees your message. You can also check out the Guru3D community. After spending about half an hour reviewing your card details, I haven't discovered anything unusual.

S
Salty___Bud
Member
246
11-09-2020, 02:07 PM
#22
Are you certain the voltage isn't enough for this speed? It's odd that it's being increased beyond what it should be, possibly related to your power supply. Both the PSU and the card were recently bought.
S
Salty___Bud
11-09-2020, 02:07 PM #22

Are you certain the voltage isn't enough for this speed? It's odd that it's being increased beyond what it should be, possibly related to your power supply. Both the PSU and the card were recently bought.

3
3b0ud
Junior Member
16
11-16-2020, 03:06 PM
#23
The PSU appears to be okay. Pay attention to the 8-pin connection between pins 1 and 2, and note that pin 3 carries the heaviest load. That’s why I recommended a BIOS flash—it could balance things out. Raise pin 3 and lower pin 1. It seems the voltage is low. I’m aware the Founders Edition runs at 1.0820 during boost and 1.062 at normal frequency. During boosting, the GPU v-core should increase rather than remain at defaults.
3
3b0ud
11-16-2020, 03:06 PM #23

The PSU appears to be okay. Pay attention to the 8-pin connection between pins 1 and 2, and note that pin 3 carries the heaviest load. That’s why I recommended a BIOS flash—it could balance things out. Raise pin 3 and lower pin 1. It seems the voltage is low. I’m aware the Founders Edition runs at 1.0820 during boost and 1.062 at normal frequency. During boosting, the GPU v-core should increase rather than remain at defaults.

M
Miel1994
Member
104
11-16-2020, 03:43 PM
#24
Your modular PSU has PCIe connections divided into two 8-pin sections. Using a single cable for two slots and having three cables per slot is fine as long as the cables are compatible with your setup.
M
Miel1994
11-16-2020, 03:43 PM #24

Your modular PSU has PCIe connections divided into two 8-pin sections. Using a single cable for two slots and having three cables per slot is fine as long as the cables are compatible with your setup.

C
Catcrafter01
Junior Member
22
11-18-2020, 04:41 AM
#25
I believe it's worth trying with the right PCIE connectors, though I'm not sure it will make a difference. Only experience will tell!
C
Catcrafter01
11-18-2020, 04:41 AM #25

I believe it's worth trying with the right PCIE connectors, though I'm not sure it will make a difference. Only experience will tell!

Pages (3): Previous 1 2 3