F5F Stay Refreshed Power Users Networks Router Recommendations with QOS

Router Recommendations with QOS

Router Recommendations with QOS

Pages (2): 1 2 Next
G
Gladiador70
Senior Member
698
09-04-2016, 08:41 PM
#1
Hi, your current setup runs at 100/20 with a Tp-link Archer VR600v. The QOS feature helps but caps speeds to around 50/15, which matches what you’ve experienced. An engineer confirmed this is due to CPU constraints. You need the QOS for a device that demands high upload bandwidth without strict limits. Your router lacks bandwidth control. Looking for creative solutions or FTTP routers with QOS support that can handle 250/40 connections smoothly?
G
Gladiador70
09-04-2016, 08:41 PM #1

Hi, your current setup runs at 100/20 with a Tp-link Archer VR600v. The QOS feature helps but caps speeds to around 50/15, which matches what you’ve experienced. An engineer confirmed this is due to CPU constraints. You need the QOS for a device that demands high upload bandwidth without strict limits. Your router lacks bandwidth control. Looking for creative solutions or FTTP routers with QOS support that can handle 250/40 connections smoothly?

S
solariiss
Member
146
09-04-2016, 09:16 PM
#2
I've tested the Ubiquiti EdgeRouter-X/SFP and UniFi Security Gateway on fiber links at 300/200Mbps using hardware offloading or SQM (QoS). The hardware offloading gave a better mix of speed and bufferbloat compared to SQM. At slower speeds of 100/100Mbps, SQM performed better as recommended by Ubiquiti. Also, you can use SQM for downloads and uploads separately. The ER-X/SFP is an affordable yet flexible router if you locate it. For greater customization, consider a dedicated firewall device. Options include pfSense, OPNsense, IPFire, or Untangle. Routers supporting third-party firmware such as OpenWRT, DD-WRT, or Tomato usually offer solid QoS features—just ensure the CPU can handle them. Avoid devices labeled "FTTP capable"; stick with your current fiber converter or ONT and simply swap the router.
S
solariiss
09-04-2016, 09:16 PM #2

I've tested the Ubiquiti EdgeRouter-X/SFP and UniFi Security Gateway on fiber links at 300/200Mbps using hardware offloading or SQM (QoS). The hardware offloading gave a better mix of speed and bufferbloat compared to SQM. At slower speeds of 100/100Mbps, SQM performed better as recommended by Ubiquiti. Also, you can use SQM for downloads and uploads separately. The ER-X/SFP is an affordable yet flexible router if you locate it. For greater customization, consider a dedicated firewall device. Options include pfSense, OPNsense, IPFire, or Untangle. Routers supporting third-party firmware such as OpenWRT, DD-WRT, or Tomato usually offer solid QoS features—just ensure the CPU can handle them. Avoid devices labeled "FTTP capable"; stick with your current fiber converter or ONT and simply swap the router.

W
WotDafaq
Junior Member
41
09-06-2016, 06:48 PM
#3
Check if QoS can be applied just during uploads. Adjusting it to 0 for downloads may help, based on the type of QoS being used.
W
WotDafaq
09-06-2016, 06:48 PM #3

Check if QoS can be applied just during uploads. Adjusting it to 0 for downloads may help, based on the type of QoS being used.

K
kenshivagabon
Junior Member
10
09-19-2016, 05:50 PM
#4
Galactical brain
K
kenshivagabon
09-19-2016, 05:50 PM #4

Galactical brain

R
Rayzh_HD
Junior Member
10
09-19-2016, 07:45 PM
#5
It seems the input values need to fall within a range of 0 to 1000.
R
Rayzh_HD
09-19-2016, 07:45 PM #5

It seems the input values need to fall within a range of 0 to 1000.

Q
Qufi
Member
171
09-20-2016, 05:05 AM
#6
Has anyone checked if the Netgear Nighthawk XR1000 can fix this issue?
Q
Qufi
09-20-2016, 05:05 AM #6

Has anyone checked if the Netgear Nighthawk XR1000 can fix this issue?

A
Apel29
Member
192
10-02-2016, 06:48 AM
#7
I've been examining the Ubiquiti Edg eRouter-X/SFP and trying to configure it for Wi-Fi. From the videos, they all appear to use a unified access point setup. I'm sure my router could work as a simple Wi-Fi hotspot, but I want to confirm before proceeding.
A
Apel29
10-02-2016, 06:48 AM #7

I've been examining the Ubiquiti Edg eRouter-X/SFP and trying to configure it for Wi-Fi. From the videos, they all appear to use a unified access point setup. I'm sure my router could work as a simple Wi-Fi hotspot, but I want to confirm before proceeding.

D
DeadpoOol
Member
175
10-02-2016, 04:19 PM
#8
The Netgear router isn't my opinion, but my Synology RT2600AC offers per-device bandwidth management. You can define a fixed bandwidth or cap it during downloads and uploads. I haven’t used this feature before because my upload speed is only 10 Mbps with a data limit, so I avoid services that strain the connection. Regarding what’s slowing the upload, I remember in my days piracy was common. I once used BitTorrent to restrict bandwidth through the software. It could be worth considering if you can control the program or hardware directly rather than replacing equipment.
D
DeadpoOol
10-02-2016, 04:19 PM #8

The Netgear router isn't my opinion, but my Synology RT2600AC offers per-device bandwidth management. You can define a fixed bandwidth or cap it during downloads and uploads. I haven’t used this feature before because my upload speed is only 10 Mbps with a data limit, so I avoid services that strain the connection. Regarding what’s slowing the upload, I remember in my days piracy was common. I once used BitTorrent to restrict bandwidth through the software. It could be worth considering if you can control the program or hardware directly rather than replacing equipment.

K
kungfutyla
Posting Freak
780
10-11-2016, 04:13 AM
#9
It's an Android TV box I found. I'm sure it's full of malware, which is why my family can still access international content. It probably runs P2P, so during busy periods the network usage spikes a lot.
K
kungfutyla
10-11-2016, 04:13 AM #9

It's an Android TV box I found. I'm sure it's full of malware, which is why my family can still access international content. It probably runs P2P, so during busy periods the network usage spikes a lot.

S
SoapPvP
Member
55
10-11-2016, 05:39 AM
#10
This appears unusual for a torrent client. If it’s transferring files via peer-to-peer connections, there may be more concerns than just restricting bandwidth.
S
SoapPvP
10-11-2016, 05:39 AM #10

This appears unusual for a torrent client. If it’s transferring files via peer-to-peer connections, there may be more concerns than just restricting bandwidth.

Pages (2): 1 2 Next