RDR2 performance
RDR2 performance
The video was posted more than a month and a half ago about the game's release. It has undergone several updates. Keep in mind that using an i5 processor in a late 2019 PC game will affect performance. They're also employing DDR4-2133 RAM, which may not be optimal. Switching to DDR4-3000 or faster could boost performance by 15-25 frames per second (or more, depending on the area).
Yes, it works well. I suggest including an additional 8GB of RAM to improve both stability and reduce the annoying stutters you encounter with only 8GB total.
What adjustments would be best? Could you achieve 60 frames per second on your existing system?
Well, RDR2 offers numerous custom graphic options. The choice of where to adjust them all depends on the player. I suggest beginning with the lowest possible settings and maintaining Texture Quality and Anisotropic Filtering at Ultra. This approach ensures minimal impact on frame rate. Next, you have two main options: you can experiment and create your own personalized configuration by observing how each setting influences visuals and performance, or you can refer to existing online guides that have already done this for you.
Here are a couple of videos to review and note the settings according to your preferences:
Keep in mind that outcomes might differ since these videos were made over a year and a half ago, and your system differs from the one tested. The game has also undergone updates. These resources provide a solid starting point that you can refine over time.
Set all adjustments to their minimum levels. Keep Texture Quality and Anisotropic Filtering at Ultra, and x16 as well. Perform some benchmark tests to gauge your FPS. This will help you understand the maximum performance achievable at your chosen resolution. Then, use the videos above to decide on each graphic setting. When making your choice, prioritize what matters most—whether it's visual quality or performance. Remember, achieving top performance often requires trade-offs.
Be aware that even with powerful hardware, RDR2 was released in late 2019 for PCs and will push your system to its limits. With a 1050 Ti processor and just 4GB of VRAM, you should manage expectations. You’ll need an additional 8GB of RAM. You can either purchase a new 8GB stick for around $53 (or overclock your existing HyperX Fury to 2800 for a possible 2933 FPS if supported) or sell the current one and buy a more expensive, higher-speed 8GB stick for roughly $54–64 depending on quality.
Upgrading RAM is often one of the most effective ways to boost PC performance without spending much, especially since used RAM is frequently in demand. Depending on your motherboard’s specifications, selecting RAM should aim to maximize speed. Higher speeds, like 2666, won’t severely restrict performance and will only raise the potential ceiling. Aim for at least 16GB if you want smooth gameplay with modern titles.
It does affect fps, just not a lot. Just 3% fps difference between Ultra and High Texture Quality and 3% fps difference between x16 and OFF Anisotropic Filtering.
Be sure to keep an eye on your VRAM usage while gaming. If it nears the 3.9 to 4 GB threshold, you may need to bump down Texture Quality to High as Ultra does use a LOT of VRAM.
Whatever you do, don't use Medium or Low Texture Quality as that will downgrade visuals big time.
Performance is great at 30 to 35 fps on your system. Your VRAM usage during gaming is acceptable, and you can push Anisotropic Filtering to its limit. A 3% drop from 30 fps equals about 1 fps loss. If performance drops due to snow, adjust settings related to Particles.
The on-screen display shows a GPU utilization of 99%, reaching a maximum temperature of 66 to 67 degrees. RAM consumption while adjusting the game settings ranges from 3.4gb to 3.6gb, I believe.
Good. Your system has roughly 400 to 600 MB of free VRAM. You might enjoy Ultra Texture Quality and play for about 10-15 minutes. Record the peak VRAM consumption. If it stays under 4GB, you’re ready to switch to Ultra Texture Quality.