RAM stock 3000Mhz XMP settings not functioning, unstable performance, issues with CPU and GPU OC MAXIMUS VIII RANGER
RAM stock 3000Mhz XMP settings not functioning, unstable performance, issues with CPU and GPU OC MAXIMUS VIII RANGER
Hey there,
I’m facing an issue with my KINGSTON HYPERX FURY 3000Mhz CL15 4x8GB. I can’t achieve a stable stock 3000Mhz with the XMP profile, not even manually. My system just doesn’t recognize it and shows the error code 55 (memory not detected).
I was able to boot with the XMP profile set to 2666Mhz or manual at 2666Mhz, but it’s unstable and I’m experiencing BSODs occasionally.
I attempted to adjust VCCIO settings according to some guides, but nothing resolved the problem.
Additionally, I can’t get a stable CPU overclock even with ASUS auto-OC; the motherboard just doesn’t respond and then displays an OC failed message or starts and crashes.
I tried using a simpler ASUS OC solution, which worked well before, but it’s not powerful enough.
Another concern is my GTX 980. It had stable overclocking in an older rig with 2500K (CM Hyper 212+ EVO), but now it doesn’t respond at all. The specs I have are:
GPU clock +170 MHz
Power limiter 122%
Memory clock +470 MHz
Voltage +87Mv
It worked in the past, but my new setup isn’t stable—especially after a few Overwatch matches.
My build includes: ASUS Maximus VIII Ranger (latest BIOS), Kingston HyperX Fury 3000Mhz CL15 32GB (4x 8GB), Intel i7 6700K, Freezer 13, Kingston HyperX Predator 240GB & WD Green 2TB, MSI GTX 980 4GD5T OC, and a PSU from CoolerMaster GM 750W PFC.
I also replaced the back fan with Arctic F12 PWM and swapped the top fan with three CM SickleFlow units, but I’m considering reverting to F12 for better performance.
Do you think the issue lies with my motherboard or could there be another factor? Any advice would be appreciated.
Thanks and sorry for the inconvenience.
Pictures:
I waste a lot of money on this and it's not working. Yes sir, I've been there before; don't act like the lone ranger in that statement. I considered mentioning it but didn't now realize the mistake. Error 55 was something I saw earlier—maybe with a CPU cooler that wasn't tightened properly, or a backplate issue or a short circuit. [I can take a look.]
When using XMP at DDR4 3200 MHz or faster, the system’s reliability is closely tied to the CPU’s specifications. Even with a 3000 memory module, I found myself questioning certain aspects. It seems the ASUS experience has become less reliable lately—high hype but lower quality now compared to the good old days. Everyone, you’ve received nine BIOS updates aimed at improving system stability. How unstable was it originally? Mostly just testing with a single stick at 3000 MHz or higher, with only a few sticks in total. Here’s what I’d suggest: it might be problematic with four sticks. I recommend setting up with two sticks in the proper slots and testing it—probably works fine that way.
I started with just 2 sticks, and 2 more came yesterday. It seems those "old" sticks might be faulty, so I’ll begin using the new ones.
OH LOL, I don’t have the latest BIOS—I’ve got version 1302. There are already four newer updates, but those ASUS update checkers kept this information hidden.
I’ll give it a shot; I think installing just the latest version would work best, not every single one.
I was hoping for MSI.
"Bad QC, buy ASUS," they said.
OMG
Thanks to everyone for the really helpful answers—I really appreciate it. I’ve never seen anything like this before.
I started with just two sticks, and yesterday came two more. That’s a problem because mixing kits is an issue—there aren’t factory-matched sets anymore. Now you’re getting a full four-stick kit, which is usually the standard. This should be a golden rule: don’t mix memory or mismatched kits. You’re unsure if the ICs were replaced from your first order, and this could change without notice.
JohnnyPernik shared his experience about receiving new sticks and his thoughts on BIOS updates. He mentioned trying to install only the latest version due to issues with older ones. He also discussed product comparisons, favoring ASUS products over others like MSI and Gigabyte. He provided links for side-by-side benchmarks.
I don't find any official 64Gb Kingston memory part number for your motherboard. If it isn't officially supported, it might work inconsistently when running at high frequencies. When transferring your GPU between systems, the overclock profile will likely need adjustment to maintain stability.