Question about PSU damage caused by damaged MoBo
Question about PSU damage caused by damaged MoBo
Could there be a risk of harming or reducing the lifespan of a PSU by connecting the 24 ATX and 8 CPU pins to a motherboard that has been damaged by static? This happened when I rushed home after receiving my PC case during school, wearing wool and not grounding the board properly. After testing, everything seemed fine with the new PSU, but experts warned that static damage might cause issues later. I had to replace the motherboard, CPU, and RAM. It’s understandable to be worried, especially since I assembled everything the day before my CPU arrived. I’m wondering if any static damage from my components could affect my PSU.
It largely depends on how it was touched and discharged. In simple terms, if it stays in your hands without reaching ground, the board should be okay.
I don't believe it's wise to assume that touching a motherboard exposed without proper protection would lead to problems, especially when wearing wool.
I appreciate your quick responses and apologize if I came across as stubborn or unintelligent.
I mounted it in the case briefly after touching it with wool, but I’ve already replaced it. I’m just curious in theory—if a mobile with static messages was connected to a PSU, would that cause any damage?
Sorry for the repetition; this is the only minor worry I have since I’ve replaced most other components for safety.
Thanks.
When installing the motherboard into the case, was the table supporting it connected to a stable electrical ground? Have you ever experienced a shock while sitting at this table? If so, you might consider using wrist straps to provide better grounding. This recommendation applies if you have modern 3-pole AC outlets.
Initially the situation was on a table made of yoga mat material carpet, but I wasn’t surprised. While working with the mobo, I also sat on my bed for a while, having it on my lap while wearing suit trousers. Sorry, but my main concern isn’t about any damage to the mobo—I’ve already replaced it. I’d like to know if any damage occurred and whether it affected the PSU connected to it.
No harm at all! You mentioned everything was okay during testing.
Typically, when you have a static discharge, you know it. Sounds like in this scenario, you are fine (as others have indicated).
Other than worrying about an unlikely concern, are you experiencing any other issues?
Begin constructing the PC first.
Only then should you start to worry, once it's built and it isn't functioning.
Not earlier.
Right now, you're not even sure if any problems exist.
Likely not.