problems with memory

Pages (3): Previous 1 2 3 Next

DaLuZshow
Member

200

11-18-2018, 01:40 AM

#11

You may upgrade to the newest version if no other guidelines appear on the site. It looks like you should first switch to F32, then F40, provided the board isn't older than those versions. Only after that can you move to the latest (F50 at this point). If the board is F32, you can proceed with F40 followed by F50. If F40 or higher is already present, you can jump straight to F50.

DaLuZshow

11-18-2018, 01:40 AM #11

Cadariou
Posting Freak

835

11-18-2018, 07:33 AM

#12

Check Ram in SOT 2 and 4, adjust voltage slightly for better stability—around 1.37V should work.

Cadariou

11-18-2018, 07:33 AM #12

Check Ram in SOT 2 and 4, adjust voltage slightly for better stability—around 1.37V should work.

vhenrixon
Junior Member

11-19-2018, 04:34 PM

#13

The QFlash tool isn't recognizing your thumb drive despite extracting the BIOS. You can still see it showing up in the boot menu, which suggests it's present but not being detected by the utility.

vhenrixon

11-19-2018, 04:34 PM #13

The QFlash tool isn't recognizing your thumb drive despite extracting the BIOS. You can still see it showing up in the boot menu, which suggests it's present but not being detected by the utility.

Sussu
Senior Member

708

11-20-2018, 09:52 AM

#14

Do you have the Geil memory ready? I’m about to install it before the BIOS flash. I don’t want another bad flash while we haven’t fixed the blue screen problems.

Sussu

11-20-2018, 09:52 AM #14

Do you have the Geil memory ready? I’m about to install it before the BIOS flash. I don’t want another bad flash while we haven’t fixed the blue screen problems.

loltribo
Posting Freak

870

11-20-2018, 10:15 AM

#15

Ensure the drive uses FAT32 format and has the BIOS set to root on it. For updates, use @Bios within Windows—it supports dual-boot updates as well.

loltribo

11-20-2018, 10:15 AM #15

Ensure the drive uses FAT32 format and has the BIOS set to root on it. For updates, use @Bios within Windows—it supports dual-boot updates as well.

DJBazzInc
Member

231

11-25-2018, 07:25 AM

#16

I have it still, but it’s not launching properly.

DJBazzInc

11-25-2018, 07:25 AM #16

I have it still, but it’s not launching properly.

RicexxGum
Junior Member

11-26-2018, 06:12 PM

#17

I don't get it, updating in Windows can vary. Try checking the settings or using the update options in the app or system. If unsure, ask for more details!

RicexxGum

11-26-2018, 06:12 PM #17

I don't get it, updating in Windows can vary. Try checking the settings or using the update options in the app or system. If unsure, ask for more details!

yooooooomu
Member

148

12-01-2018, 01:47 PM

#18

Flash a BIOS using memory that might damage the device. Update directly in the BIOS. Ensure the reliable working memory is placed first.

yooooooomu

12-01-2018, 01:47 PM #18

Flash a BIOS using memory that might damage the device. Update directly in the BIOS. Ensure the reliable working memory is placed first.

ccswede99
Junior Member

12-07-2018, 07:44 AM

#19

Run the simple command @Bios and refresh the content from the provided link.

ccswede99

12-07-2018, 07:44 AM #19

Run the simple command @Bios and refresh the content from the provided link.

louie018
Posting Freak

824

12-13-2018, 01:50 PM

#20

You can likely skip running the ECFW tool again since you've already completed it.

louie018

12-13-2018, 01:50 PM #20

You can likely skip running the ECFW tool again since you've already completed it.

Pages (3): Previous 1 2 3 Next