Problem with the new computer not turning on.
Problem with the new computer not turning on.
That is an ATX_12V_2X4, it's used for powering the cpu. Ok, I'll try it. I don't think they would sell it any longer if this would still happen, but I'll google it for myself. Thanks for bringing this to my attention
Certainly! The fans would still spin regardless of whether the BIOS is current.
Remove all Sata and Molex power connections you've connected to the power source. This indicates you're using the incorrect device.
Not a Sata or Molex power cable here. I'm referring to those that expand into a 6-pin on the motherboard. We need ATX 12V and ATX 24-pin connections only. You likely have many Molex and Sata cables in that setup, so we're checking if it's one of those, a necessary cable, or the power source causing interference. Any cables resembling Sata and Peripheral should be removed.
It should work naturally and illuminate the CPU debug indicator (if the board supports it). That’s why I’m questioning the PSU so I’ll re-seat every cable—just plug in only the necessary ones this time. Verify the front panel connections are correct and that the power switch operates properly. Just connect the 8-pin CPU power connector and the 24-pin motherboard connector, then use a screwdriver to secure the connection in the power switch.
//help.corsair.com/hc/en-us/articles/360025085372-How-to-Test-a-PSU-Power-Supply-Unit- Disconnect all fans and any SATA devices from their power cables. Connect them individually, using a paperclip between each pair. If any device becomes loose or starts to pop, remove it and only reconnect the cable returning to the power supply. This method helps identify the faulty component or cable without endangering your CPU, motherboard, or graphics card.