Problem with Ram, want to assist?

F5F Stay Refreshed Hardware Desktop Problem with Ram, want to assist?

Pages (3): Previous 1 2 3

GoldenPvp_YT
Junior Member

04-23-2018, 08:28 AM

#21

noted that the QVL list currently features only one 4x4 16GB unit operating at 2666 MHz. acquiring a multi-unit kit capable of handling 2400 MHz is likely limited. suggest focusing on running at 2400MHz with stable performance as a realistic target.

GoldenPvp_YT

04-23-2018, 08:28 AM #21

zlip88
Member

198

04-23-2018, 10:29 AM

#22

Appears fine. Interesting that the board uses a standard Jedec timing not shown in the RAM listing when posted. As seen in the CPU-Z SPD tab, the lowest Jedec #7 1067mhz CL 16, but it's posting CL 15. You might consider updating the BIOS on the board. It could make a difference, though it might not. Worth trying. If you have the newest BIOS, I can offer more guidance. Just want to confirm the firmware is current.

zlip88

04-23-2018, 10:29 AM #22

oOEmmaOo
Posting Freak

818

04-24-2018, 11:44 PM

#23

I'm using the newest update for my pinnacle ridge line, @narrdarr. I'll check the clocks at 2400 and see if it stabilizes.

oOEmmaOo

04-24-2018, 11:44 PM #23

I'm using the newest update for my pinnacle ridge line, @narrdarr. I'll check the clocks at 2400 and see if it stabilizes.

Gillious
Member

166

04-25-2018, 02:14 AM

#24

I would adjust the tRC and Tfaw settings. Changed tRC to 58 and Tfaw to 38. You might also want to turn off power-down mode and Gear Down options, available in the sub timings menu.

Gillious

04-25-2018, 02:14 AM #24

I would adjust the tRC and Tfaw settings. Changed tRC to 58 and Tfaw to 38. You might also want to turn off power-down mode and Gear Down options, available in the sub timings menu.

Pages (3): Previous 1 2 3