Problem encountered during startup. Build configuration failed to initialize. Check system logs for details.
Problem encountered during startup. Build configuration failed to initialize. Check system logs for details.
The link you shared is for a CPU support page on Gigabyte's website, specifically for their motherboard models.
I haven't downloaded any version of the BIOS yet. Could you clarify which system or device you're referring to?
Sure, I understand. It looks like your board should work with the 5000 series Ryzen out of the box since it's rev 1.3. The manual didn’t mention debug LDS, which is a bit frustrating. Make sure you’re flashing the BIOS properly—swapping in a different CPU like a 3000 series or another 5000 series chip can help confirm if the issue lies with the board’s firmware or the CPU itself.
I don't have another CPU at the moment. The flash drive is FAT32, and I renamed the boot file to "gigabyte.bin". After turning off power and then reactivating it, I held the QFLASH_PLUS button on the motherboard for a few seconds. It flashed orange, blinked for about three minutes, then stopped blinking but kept running. I understand the process should be lengthy, but the machine operated without the orange light for 19 minutes without any activity, suggesting it might not be functioning properly. EDIT: I also tried inserting it into a USB port labeled BIOS.