Power issue with the motherboard from the PSU.

Pages (2): 1 2 Next

davachio
Member

204

11-02-2023, 07:21 AM

davachio

11-02-2023, 07:21 AM #1

ultraflash1
Junior Member

11-05-2023, 06:25 PM

Yes, I also attached the 8/4 pin power cable for the CPU.

ultraflash1

11-05-2023, 06:25 PM #2

Yes, I also attached the 8/4 pin power cable for the CPU.

Artur630
Member

168

11-06-2023, 12:19 AM

Absolutely.

Artur630

11-06-2023, 12:19 AM #3

Absolutely.

tamemarco
Senior Member

482

11-06-2023, 09:14 AM

It seems like a DOA module, provided the power switch is connected properly and the switch works. You might want to connect two pins on the header with a metal piece to verify.

tamemarco

11-06-2023, 09:14 AM #4

It seems like a DOA module, provided the power switch is connected properly and the switch works. You might want to connect two pins on the header with a metal piece to verify.

DarkHorseNL
Junior Member

11-08-2023, 04:43 PM

Sure, here’s the complete PC specification sheet. Please ensure you attach the connection diagram image for reference.

DarkHorseNL

11-08-2023, 04:43 PM #5

Sure, here’s the complete PC specification sheet. Please ensure you attach the connection diagram image for reference.

VebbiHD
Member

209

11-08-2023, 09:36 PM

What processor are you connecting it to? Also, what are the general specifications? You might want to boot with one drive at a time and reset the CMOS if needed.

VebbiHD

11-08-2023, 09:36 PM #6

What processor are you connecting it to? Also, what are the general specifications? You might want to boot with one drive at a time and reset the CMOS if needed.

tomaszlew2
Junior Member

11-09-2023, 12:06 AM

Ryzen 5 3600 Asus Prime X570-P G-Skill Ripjaws V 3600 16GB Western Digital Blue 500GB M.2 2280 XFX Radeon RX 5700XT 8GB triple cooling Thermaltake V200 EVGA 500W BQ 80+ bronze

tomaszlew2

11-09-2023, 12:06 AM #7

Ryzen 5 3600 Asus Prime X570-P G-Skill Ripjaws V 3600 16GB Western Digital Blue 500GB M.2 2280 XFX Radeon RX 5700XT 8GB triple cooling Thermaltake V200 EVGA 500W BQ 80+ bronze

Killerman1834
Posting Freak

885

11-09-2023, 06:26 AM

One of the two 2x4 pin connectors appears to be positioned halfway. The angle of the photo might also contribute to this appearance.

Killerman1834

11-09-2023, 06:26 AM #8

One of the two 2x4 pin connectors appears to be positioned halfway. The angle of the photo might also contribute to this appearance.

kingmonferno
Junior Member

11-09-2023, 03:19 PM

Confirmed. It wasn't that. Likely just an effect from how the first image was positioned. They still look somewhat similar despite differences.

kingmonferno

11-09-2023, 03:19 PM #9

Confirmed. It wasn't that. Likely just an effect from how the first image was positioned. They still look somewhat similar despite differences.

MrBattleKing
Member

11-09-2023, 04:24 PM

#10

Check the manual at the provided link. Review pages 1 to 15. Ensure your power button and LEDs are correctly linked. The system won’t start if the PWRSW isn’t connected or is missing. Required cables are typically included in the case.

MrBattleKing

11-09-2023, 04:24 PM #10

Pages (2): 1 2 Next